Joshua Sharp

thin fiber board and wrapped in vinyl

the edge is done !!! i will still do things to her to add extra pop to the ride but she is done and here are all my pictures from SBN 2014 SUB BOX !!! seat trim panels and pics of the car and engine bay Hope you guys enjoy the car and cant wait to show when else i do to her.

what price are you looking to get for them? and i would be willing to trade the wheels i have now plus cash, one rim has rubbed a curb tho so it has a little blemish :-(

if these are stil available in a few weeks i will take them off your hands most likely !

ok so im trying to figure this out and i cant seem to figure it out ... i have a 50A astron power supply that i use for my capri and will start using on my edge ... with the capri everything works good ... the edge ... not so much before you think i have already checked and re checked all the wiring and nothing is crossed, messed up, or wrong. when i plug the astron up to the edge ( which is wired in the back of the car with a 50A plug that goes into the distro blocks which then goes directly into the battery terminals up front. when the car is off the astron does nothing ... the amp meter does not move ... now the minute you turn the key to the acc. position ... it pegs the astron and maxes out the amp meter WAY past the 50amp mark ... im thinking it has something to do with the computer but i dont see how when what would happen if i wanted to jump start the car ... the jumping car would be 14V which the astron is set at and you turn the key on to start car ... Just really confused about it and trying to figure it out.

subs will be 2 Linear Power ISO-KIT 8" subwoofers. in a custom ported box tuned to 24hz

alot easier to mount the tweeters on the dash because its alot easier to aim them at the driver and you are able to mount the tweeters deeper on the dash for better stage depth. The seats were actuall quite easy to strip and put back together ... all clips and zippers

use a line out converter for high level in to RCA out ... i would use the rear channels since they are useless anyway or use all 4 channels and upgrade the front as well audiocontrol makes very good line out converters

To tune the processor you have to hook the processor up to the computer to use the software so this is a video of how i modded the car to accept the computer. i was supprised to see that in that component ford actually used good audio grade caps in the circuitry.

i know this is in the power train section ... if possible could a mod move this to the appropriate location

running the audio wire from the radio to to processor running the speaker wire to the door speakers ran the wire for the amps and all done the seats will still function and lastly from what i have so far are the tweeters placed upon the dash i will post some more pictures if i come across some that i missed ... Details of the system the speakers are Blues Car Audio 6.5" active components set Blues Car Audio is owned by Linear Power The 6.5" door speakers are on a Linear Power 2150, The Tweeters are on a Linear Power 2150 and the two subs will be on the Linear Power 2250.

was finally able to use my second battery posts those zip ties have since been changed to black. the audio processor for the car a Helix DSP

the seats ! test fit FINISHED and mounted !!! Once the trim panels are added there will be a second pattern that will place over them so that when the seats are folded down no carge space is lost you can still put large cargo over the amps if needed. Running the Power and Ground for the amps is next.

ill leave the chit chat out and just post all the pics i have :-) wrapped the battery to help keep engine heat off it added some lighted door sills and changed color to blue to match the blue puddle lamps more deadener on the door itself old vs new of the front door speakers how i mounted the door speakers Here are the Amps that are going to be going into the car ... Two Linear Power 2150s and One Linear Power 2250 Where am i going to put these beautiful amps you ask? Well here is part of the car you will recognize

just a little background of me ... i am into car audio mainly the sound quality aspect and i compete in sound quality. So the main bulk of what i have done to the edge is for sound system. I started off a while back putting sound deadener throughout the whole car 160 square feet to be exact of Second skin audio damplifier pro. I dont have many photos of the finished product but every part of the car is covered and the doors have 2 layers