Jump to content

crzjorge

Edge Member
  • Posts

    22
  • Joined

  • Last visited

Everything posted by crzjorge

  1. i just completed the first oil change and installed the motorcraft FL-400S from walmart... only 3 bucks and change.
  2. it seemed like it did but it actually has a rubber liner attached that cannot be replaced i suppose the plug itself will have to be replaced eventually
  3. it was all tight the plug was simple with a wrench and a 15mm but the filter like i said was a major pain to take off very tight.. i have heard (in other forums) some people just jam a screw driver through the filter to get it out the first time.
  4. i have a noise from a plastic on the back moon roof i have to reach back and push the plastic back in place.
  5. any problems with the reflection of the dash on the windshield after the tints... when i have the bamr shade open it is very noticeable.
  6. make sure you have the right tool to take the oil filter off for the first oil change. that thing was over tightned by the robot that puts it in @ the factory. i had to use a special oil filter wrench that actrually bent in the filter to grasp it.
  7. just completed the oil change at 3333 miles. there was alot of metal residue on the plug bolt. the filter was a bitch to take off. other than that it was fearly easy.
  8. well i'm sticking to 3k just because i can... i have a place and the tools to do this. and all my other cars have been done at 3k i do not trust the dealer usually around here the dealer oil changes are done by some 16 yearold that is barely out of highschool and they usually do not look at anything i will follow the maitenance plan as stated in the manual but i will do it myself. if it is something i cannot do i have a good friend who is an ASE certified master mechanic that has a full shop he will be able to help with anything out of my knowledge. i think it will be arlight... and also i will probably keep this car in my family till the doors fall off lol... so i'mn not too worried about resale.
  9. got the edge on Mar 20 2007 that was a quick 3k... going to use Motorcraft FL-400S bought at the local walmart (so glad they carry it) and castrol fully syntetic oil since it comes from the factory with semi syntetic i belive we can go directly to fully syntetic. i hope the change is rather quick... anyone have any idea where the filter is located?? easy to get to?
  10. hrm... heck if i can remeber... hahah i gotta go back to my CC receipts... i'll post it lata
  11. I drove this past week for 1000 miles all around florida left ft. lauderdale to orlando through the east coast, then to Daytona beach (yes the edge handled great on the sand), then off to gainesville (HOME OF THE GATORS), then to Cedar Key then came back thru the west coast and back to ft. lauderdale.. the drive was great fun and the edge rode beautifuly.... on the way up to orlando on the turnpike acording to the computer on the car i got 20 mpg at 80 MPH average speed in 3 hours. from then on i really did not check on the milage. but i thought it was not bad any thoughts???
  12. i ordered my edge on 1-10-07 and finally received it 10 weeks later on 3-20-07/ when i ordered it i was told 6 to 8 weeks.. then later it became 6 to 10 weeks. well they where right on the money.. i kept track of the proggress here on the forum and found that it was shipped on 3-10-07 and i got it 10 days later here in south FLA. it is an awsome little ride man... be patient the wait will be worth it.
  13. :happy feet: after a long wait (since jan 10th) we finally picked up the edge last night. :happy feet: we got the SEL, in pewter and black cloth interior w/ BAMR, towing package and reverse sensors. i haven't been able to drive it much but i'm sure we are going to have some good fun with it... i will try to drive it and give a full report. for now here is a couple of things.... i thougth the seat was going to be a just slide lever and back lever.. but it is not it has a driver power seat sweet... the mirror has auto dimming... did not know it had that.... the recliner of the back seats is great specially to admire the BAMR and that thing is HUGE!!!.... my daughter who is 3 1/2 yrs old... was a little upset that her moon roof did not open... but got over it quickly... the stereo sounds good.. not bad for a stock w/o any upgrades. interesting how the bamr button works... i press it and it starts opening it.. it then stops... so i have to push it again... then on the way to close i push it... and stops again before it is fully closed so i have to push it again... is this a safety thing?? i got the extended warranty and the wheel and tire protection.. I'm sure i will make use of it. this is turning out to be a long report.. but those are my first thoughts... later there might be more.. and some pics to go with it...
  14. well i picked up the mighty Edge last night thanks for everyones help... i will have a review of it later on this week since the wife still will not let me drive it!... but so far so nice!...
  15. thanks for the info i got it from blueovalforums but thanks... i wonder what the trans time is to get to south florida. -JV
  16. VIN: 2FMDK38C67BA81666 Here's what i got last week. Receipt Date: 1/10/2007 Serialize Date: 2/15/2007 Segment Date: 2/15/2007 Sequence Date: 2/23/2007 Blend Date: Produced Date: Gate Release Date: Ship Date: Arrival Date: Sold Date: My salesman told me that it would be built this week... where does he get that info?!?! or is he full of it?!
  17. good can i get a new VIN? oh well my salesman told me that it would be built next week... where does he get that info?!?! or is he full of it?!
  18. could someone check the status of my Edge please!... VIN: 2FMDK38C67BA81666 hrm.. 666 not too good.. any Priests or Pastor who might want to bless the Edge as it leaves the plant??
  19. from what i understand this is not a problem. my brother has this kit on his 05 Nissan Murano for over a year now still working beautifully... I had the HID wanabes on my Acura MDX they are regular bulbs that run at a higher WATTAGE to make more light... yeah it looks brighter. I had them installed on the headlights w/o a problem... i installed them on the fogs... and it melted the clear plastic in the front not the harness... I was able to install regular bulbs and return the car to Acura after my lease was up... it is their problem now... I belive they run cooler... i will give a full report once i receive the Edge and order the HID kit.
  20. i jsut ordered the car so i'm waiting to get it and order this: http://cgi.ebay.com/HID-Xenon-Conversion-Kit-H11-8000K_W0QQitemZ9716276425QQihZ008QQcategoryZ94850Q QcmdZViewItem://http://cgi.ebay.com/HID-Xenon-Conve...Q QcmdZViewItem://http://cgi.ebay.com/HID-Xenon-Conve...Q QcmdZViewItem://http://cgi.ebay.com/HID-Xenon-Conve...Q QcmdZViewItem altho i'm still debating weather to use 8000K or 6000K... aww and i'm replacing both headlight and fog. gotta match them
  21. I have ordered a new Edge from my local dealership i'm still waiting for it... now a friend of my family got one as a rental from enterprise. how do you feel about that. I'm not too happy myself.
×
×
  • Create New...