Cammin' 08

They are after market cats. Unfortunately the price difference between and aftermarket and OEM is a huge price difference. Both OEM sensors are/will be OEM. Unfortunately the misfire was on both sides so I'm just trying get the 1 side fixed. I'm pulling the manifold today to check all the gapping and sure the plugs are good along with all the vacuum lined and so on.

That definitely is in the middle of nowhere. I'm between fayetteville and raleigh.

I've cleared the code and put roughly 50 miles or so and it popped back on. No exhuast leak. I had a minor one but got it readjusted and fixed. I just ordered a new one from rock auto today so once it gets here I'll put the upstream one in. Just for testing I had a few extra sitting around from my mustang so I put one in to see if it'll help.

I've had it about a year now. I posted it up on the 2007 edge section. The edge is just your average 2007 red SEL, my suburban the same 2001 z71, and the mustang.

Possibly but the issue is I already replaced the cat and downstream o2 and tge code still shows.

Hey guys I'm currently trying to trouble shoot this code on my wife's 2007. Back story. I took the car in to get warranty work due to a misfire. They replaced the 1 coil but immediately after the misfire fire came back. They then replaced the same plus 3 other coils and the PCM plus all 6 plugs. The misfire is gone. I pick It up and once I leave the parking lot the check engine light comes back on. The service rep said they would need to replace the down stream 02 and the bank 1 cat. This I did my self since it was not covered under warranty. After replacing the o2 and cat the light is still on. Any suggestions, TSBs, or anything would be greatly appreciated. John

Hey everyone, I Joined The Forum To Trouble Shoot My Wife's 2007 edge. Little about me, my Name is john, live nc, active army, I also have a full bolt on cammed 2008 mustang and a 2001 suburban. John