Jump to content

built2prfctn

Edge Member
 View Profile  See their activity

  • Posts

    131

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Posts posted by built2prfctn

  2. 2015 Edge Sport Towing

    in Cargo, Hauling, Roof Racks & Towing

    Posted

    A follow-up regarding my earlier wiring-kit problems:

     

    Although Curt sent me a new (and slightly-different) wiring module, I STILL had no brake lights coming out of the module after splicing-in the new one. I then traced and tested all the wiring back to the L/H OEM wiring harness connector, and found that I had a stop lamp signal going IN to the rear lamp housing... but no stop signal coming back OUT of either the lamp housing nor the Curt wiring harness. This therefore resulted in my getting no stop lamp signal going into the Curt module (and obviously nothing then going out of the module down to the trailer connector harness.

     

    Ironically, the new module that Curt sent me had an extra lead going into it... one that my original module did not have. It was colored Red and labeled "Stop-lamps". In the interest of having already spent too much time on this problem, I decided to run that lead up to the stop lamp lead (going into the tail lamp assembly), and suddenly I finally had my stop lamp signal showing-up at the 4-flat wiring harness going to the trailer! I then re-ran this extra wire to the stop-lamp lead on a permanent basis, and put it all back together... and the problem is finally solved.

     

    I have no idea as to why their #56272 kit was not working as designed on my particular car, but at least I finally got that issue resolved (although via using an extra input wire to do it)... but, as long as it's now working, right?

    Any idea what the model number is of the good harness?

  11. CAI

    in 2.7L EcoBoost

    Posted

    I did the complete CAI change for my 2014 edge Sport and used the K&N system.

    A complete waste as Ive notice zero change in performance or gas mileage.

    If I had to do it over Id just buy a K&N or other brand aftermarket filter. and pocket $300

    I was doing it strictly for a deeper engine sound.

  13. CAI

    in 2.7L EcoBoost

    Posted

    NO WAY is an Edge a "truck"! And if you think a cold air intake is going to change the way it sounds you have L-O-T-S to learn.

     

    An F-150, or my F-250 diesel or my SON's RAM 2500 4wd CTD is a truck. Edge is a crossover SUV based off the FUSION AUTOMOBILE.

     

    No shit dude! Forgive me for calling it a truck! And it most definitely will have a sound improvement.

×
×
  • Create New...