SpanielChung

After years of using forums like this to help fix my BWM, decided to go and get "something more reliable". Bought an edge with 60k on the clock and after 2 months the door ajar problem came and stayed. I still can't believe Ford are not recalling their cars for this problem, it's criminal because it is not something that can just be ignored. After some trial and error I ended up with a variation on the reed switch solution and thought I'd share it for all the other Edge owners that will inevitably end up with the problem. It's basically the same, but with a normally open push to make switch mounted just inside the door. You can't see it unless you look for it, and if it fails in the future it should be easy to replace. If I did this again, I would probably use a wire harness to connect the new switch. For this project I just soldered the wires and wrapped with electrical tape. http://www.frys.com/product/2874724?site=sr:SEARCH:MAIN_RSLT_PG Massive thanks to all who shared their solutions and info about which wires to chop!