Audrazas

I recently changed the upper mount bearing due to such a problem. the problem is gone. Put your hand on the spring and turn the steering wheel all the way to both sides, you should feel a hit in some spring there and it will be a bad upper mount bearing.

has anyone ever tried a smoke test to check the evap system? if so, where was the smoke blown? thank you

the problem was the ABS sensor in the front wheel. had an crack which is visible only if you look closely

I got these https://www.autodoc.lt/trw/2193000 and below you can see OEM codes. And after checking on this page https://shopparts.i25ford.com/oem-parts/ford-pad-brake-eu2z2v200e?c=Zz1icmFrZXMmcz1yZWFyLWJyYWtlcyZsPTExJm49QXNzZW1ibGllcyBQYWdlJmE9Zm9yZCZvPWVkZ2UmeT0yMDExJnQ9c2VsJmU9My01bC12Ni1nYXM%3D shows that they replaces with these codes. So I have made a mistake somewhere. It's hard when you have the only edge like mine in whole country

Hi. Help needed. Does anyone know why the rear brake pads are not suitable for my ford? according to the codes, they should be good, but it seems that they are too small and should be wider. My edge is 2011 fwd 3.5l sel. Maybe anyone know what is correct code for wider pads suitable for my edge? Thank you.

Does anyone know what are the most common failures with this code? Where to look for the problem? It appears while driving and disappears after a few seconds. Could it be a bearing? Thanks

1004ron I did. Lithuania, ford edge 2011 sel, 3.5l 213kw

No I didn't. It was an easy job. The work lasted maybe half an hour to took the tensioner of and measure a bearing. Now I can say if someone needs that dimensions is 70mm height 25mm width and 17mm center. Thanks for trying to help me one more question. how often you change gearbox filter or it's unnecessary to do that ?

it is the easiest way. I just wanted to have all parts before disassembling to do repairs faster.

Hi. Maybe someone can tell me what are the dimensions of the serpentine belt tensioner bearing? I have problems with parts in my country.