Jump to content

jrod

Edge Member
  • Posts

    102
  • Joined

  • Last visited

Posts posted by jrod

  1. I have a 2007 Ford Edge with about 40K miles on it. I bought the "Premium" Extended Warranty. The Vista roof doesn't seem to be opening and closing properly, so I took it into the dealership. They informed me that the vista roof panels were not lining up properly and therefore the "roof panel rails" needed to be replaced. Unfortunately, Ford claims this is not covered under the Extended warranty (although every other nut and bolt in the car is). So, they're saying it'll cost me $2800 to correct. I called the 800 # for Ford Warranties and they pretty much told me "too bad".

     

    Has anyone else run into an issue with vista roof not being covered under Extended Plan?

    I just took my 2007 Edge in to the Dealer for same issue. Mine was opening fine but very sluggish when closing, and it even froze up on me this past summer. Luckily I have 21 days left on my warranty and I'm under miles because they told me it was a $5000.00 job to fix. I was told an outside glass company had to come in with special tools and remove roof, then the whole upper interior of the car had to be removed to to properly fix the issue. Supposedly about a 2 day job. He also said there is a Technical Service Bulletin (TSB) out on the issue. If I am not mistaken, a TSB will be covered by Ford even if the vehicle is past it's warranty period. Not sure on that so don't quote me.

  2. Real excited about my Edge SEL+ on order VIN #2FMDK49C07BB10373. Would someone please let me know the status and possibly a print of my window sticker. I would really appreciate it.

     

    Thanks.

    Not sure if you got a response yet from blueovalforums or not but here is your info.

     

    Receipt Date: 4/9/2007

    Serialize Date: 4/13/2007

    Segment Date: 4/13/2007

    Sequence Date: 4/26/2007

    Blend Date: 4/27/2007

    Produced Date:

    Gate Release Date:

    Ship Date:

    Arrival Date:

    Sold Date:

  3. If possible, I'd appreciate any information for the following VIN: 2FMDK39C17BA92962

     

    This is a Ford Edge factory order that my dealer tells me was placed on 3/5/07. Thank you.

    There should be some real progress by the first of the month!!

     

    Receipt Date: 3/5/2007

    Serialize Date: 3/8/2007

    Segment Date: 3/8/2007

    Sequence Date:

    Blend Date:

    Produced Date:

    Gate Release Date:

    Ship Date:

    Arrival Date:

    Sold Date:

  4. Hi , sorry for being a total baffoon but could someone tell me what do these ones mean.

     

    Segment Date: 2/15/2007

    Sequence Date: 2/23/2007

    Blend Date: 2/26/2007

    Produced Date:

     

    thanks

     

    mrtee

    Receipt Date: The day Vehicle Operations recieved your order

    Serialize Date: The day a VIN number is assigned

    Segment Date: The day V.O. determines the week your vehicle is to be made

    Sequence Date: The day V.O. determines which day your vehicle will be made

    Blend Date: The day V.O. determines the order your vehicle will be built in that specific day

    Produced Date: The day you vehicle was completely assembled

    Gate Release Date: The day you vehicle is cleared for shipment

    Ship Date: The day your vehicle ships

    Arrival Date: The day you vehicle arrives at the dealership

    Sold Date: The day you take delivery of your new vehicle

  5. jrod, aren't the young guy in the pic with the wife picking up a new Edge on the right hand side here?

     

    Also, my apologies, if us in the field had done better with wholesale and retail sales, we'd all be doing alot better right now.

    Yeah that's my wife and I in the pic, and I'm not putting any blame on Ford's sales force or their plant workers (hourly or salary). Upper management got complacent, cut corners and basically neglected to keep itself in tune with the customer and future market trends. But what's done is done!!! I love this company and have faith in it's turnaround. Our most recent products in the last few years support my feelings. The Japanese companies will have their problems, Toyota is already starting a downward spiral in quality and other problems. Public perception is the key, and hopefully this new marketing campaign I'm hearing about will address that need. Have faith in us too!!! Us Ford workers are depending on you!!!!!

  6. Thanks for the help so far and Im sorry to hear that your being layed off.

     

    If you are using Conceps to track VIN info, can you help me figure it out so I can help everybody around here with their tracking needs? I work at a Ford Dealer so hopefully I can obtain the Lincoln info too.

     

    -Dan

    No I'm not using Conceps. I use an internal Ford site that seems to only be in the plants. You can try on you computer at your dealership if you want, www.my.ford.com. Hopefully it works, but the site has a lot of plant specifics, different manufacturing factors and details and so on, but it's worth a try!!

  7. Hi,

     

    After two months I have finally received my VIN. Sure would appreciate it if someone could do a check for me as to when my delivery date might be. Thanks in advance. The number is:

     

    2FMDK39C17BA81198

     

    Horn

    I had thought I gave this to you, I must have missed you! sorry!!

     

    Receipt Date: 12/27/2006

    Serialize Date: 2/15/2007

    Segment Date: 2/15/2007

    Sequence Date: 2/23/2007

    Blend Date: 2/26/2007

    Produced Date:

    Gate Release Date:

    Ship Date:

    Arrival Date:

    Sold Date:

  8. Hi, I ordered an Edge fully loaded on February 11th. I need this car by the start of April as i lose my wonderfully crap 97 350000km GMC Safari van around the start of April. I would like to know that my Edge will be here by the end of March.

    My VIN# 2FMDK49C37BA84657

     

    Thanks for any help.

     

    Mrtee

    Here is the info, not sure if it'll be there by April but it'll be close.

     

    Receipt Date: 2/12/2007

    Serialize Date: 2/16/2007

    Segment Date: 2/16/2007

    Sequence Date:

    Blend Date:

    Produced Date:

    Gate Release Date:

    Ship Date:

    Arrival Date:

    Sold Date:

  9. Thanks Jrod for your info.

     

    Any update? :hyper: Any update? :hyper: Any update? :hyper:

    Sorry to feel like an 18 year old but I really got 47... :yup: :yup:

    Everytime it is the same thing: excitement :headspin: excitement :headspin: excitement :headspin:

     

    Going on March break next week to Jay Vermont and I am sure I would like being home to check the status...

     

    Would be great if you could give me an update before I leave on Friday .

     

    Again Vin is:

    2FMDK49C17BA81031

     

    Marc

    Well if you're lucky you might get it before you leave. Congratulations!!!

     

    Receipt Date: 1/17/2007

    Serialize Date: 2/15/2007

    Segment Date: 2/15/2007

    Sequence Date: 2/16/2007

    Blend Date: 2/16/2007

    Produced Date: 2/27/2007

    Gate Release Date:

    Ship Date:

    Arrival Date:

    Sold Date:

  10. What does the Gen. pool mean? Will you still have a job at Ford. . .kinda like sitting in the "dugout?"

     

    Well, everyone here certainly appreciates your help in locating their Edge/MKX models :rockon: I hope the future holds good things for you and Ford both. :yup:

     

    THANKS FOR EVERYTHING!

    I am still employeed by Ford. GEN stands for Guaranteed Employment Number. It is a UAW negotiated benefit that prevents a laid off person from going to the street. To sum it up, there are more workers than jobs, so we are put into a pool based on hire in date and are susequently used for non traditional work, and sometimes, but rarely put back on the floor to fill in when needed. I am definitely glad we have GEN, but the stability of working in my trade (Machine Repair), staying fresh and sharp working on the line is much more preferrable.

     

    Our site (Cleveland) has around 800 skilled trades, and only 170 GEN spots for skilled trades. I happen to have enough seniority to hold GEN and not go to the street, which is a great thing. However, around 80 other skilled trades workers here don't have enough seniority and are on the street, which isn't a good place to be since contract negotiations are in September.

  11. Jrod,

    Any new news with mine. I hope. Sorry so impatient, but we really need it to ge there.

    msemple

    I checked about an hour ago and it was still the same. I'll check again in the next two days for an update before I get laid off. If it's updated, I'll post it or PM you!

  12. Well folks, I have to tell you all it has been a pleasure helping everyone with their VIN#'s the last few months!! I know how frustrating it is to deal with dealerships most of the time, I know I had a hard time with mine. Unfortunately I just learned that I will be getting laid off into "GEN" (labor pool overflow program) on Monday. I most likely will no longer have access to the VIN# tracking system, so I can only help out another 2 days. Hopefully there are some other peopleon this board who can help you guys and gals out!!! I will still be posting here from home!!! Good luck and enjoy those Edges and MKX's!!!!

  13. It has been two weeks since my last check - can someone give me an update on this VIN?

     

    2FMDK39C37BA78612

     

    Thanks

    TXMARTIN,

     

    I'm glad you finally got that whole VIN#!!!

     

    Receipt Date: 1/25/2007

    Serialize Date: 2/8/2007

    Segment Date: 2/8/2007

    Sequence Date: 2/16/2007

    Blend Date: 2/21/2007

    Produced Date:

    Gate Release Date:

    Ship Date:

    Arrival Date:

    Sold Date:

  14. jrod,

     

    I thought I could wait a couple weeks for more information but I can't, could you please see what stage our car is in now?

     

    QUOTE(Aggie79 @ Feb 22 2007, 01:21 PM)

    If someone wouldn't mind checking my VIN for the status, I would greatly appreciate it also.

    VIN # 2FMDK38C27BA81776

     

    Thanks a bunch!

     

    Aggie79,

     

    Welcome aboard!!!

     

    Receipt Date: 2/5/2007

    Serialize Date: 2/15/2007

    Segment Date: 2/15/2007

    Sequence Date:

    Blend Date:

    Produced Date:

    Gate Release Date:

    Ship Date:

    Arrival Date:

    Sold Date:

     

    We really appreciate your help. You are providing a good service for Ford customers.

    Aggie79,

     

    A little more progress,

     

    Receipt Date: 2/5/2007

    Serialize Date: 2/15/2007

    Segment Date: 2/15/2007

    Sequence Date: 2/23/2007

    Blend Date: 2/27/2007

    Produced Date:

    Gate Release Date:

    Ship Date:

    Arrival Date:

    Sold Date:

  15. jrod,

     

    Could you check one last time on this one?

     

    the VIN is

    2LMDU88CX7BJ13224

     

    Thanks so much.

     

    Dan G

    Dan,

     

    Congrats!!! It's on the way!!!!!!!!

     

    Receipt Date: 1/11/2007

    Serialize Date: 2/1/2007

    Segment Date: 2/1/2007

    Sequence Date: 2/9/2007

    Blend Date: 2/14/2007

    Produced Date: 2/23/2007

    Gate Release Date: 2/26/2007

    Ship Date: 2/25/2007

    Arrival Date:

    Sold Date:

  16. My VIN is: 2FMDK49C97BA80600

     

    Can someone help me track this VIN.

     

    Much appreciated.

    It's still the same as last time.

     

    Receipt Date: 12/26/2006

    Serialize Date: 2/12/2007

    Segment Date: 2/12/2007

    Sequence Date: 2/16/2007

    Blend Date: 2/20/2007

    Produced Date:

    Gate Release Date:

    Ship Date:

    Arrival Date:

    Sold Date:

     

    As far as the system updating, there seems to be no clear process, but a lot of times it's updated Wednesday evenings.

  17. could someone check the status of my Edge please!...

     

    VIN: 2FMDK38C67BA81666

    hrm.. 666 not too good.. any Priests or Pastor who might want to bless the Edge as it leaves the plant??

    crzjorge,

     

    I'm sorry to inform you that your Edge mysteriously caught fire and incinerated right on the assembly line!!!!

     

     

     

     

     

    Just kidding...LOL

    Here's your info so far.

     

    Receipt Date: 1/10/2007

    Serialize Date: 2/15/2007

    Segment Date: 2/15/2007

    Sequence Date: 2/23/2007

    Blend Date:

    Produced Date:

    Gate Release Date:

    Ship Date:

    Arrival Date:

    Sold Date:

  18. NYEdge,

     

    Sorry!, everything is still the same.

     

    Receipt Date: 1/22/2007

    Serialize Date: 2/8/2007

    Segment Date: 2/8/2007

    Sequence Date: 2/16/2007

    Blend Date: 2/22/2007

    Produced Date:

    Gate Release Date:

    Ship Date:

    Arrival Date:

    Sold Date:

     

     

    GT475,

     

    It is my understanding that the wheel issue should have been rectified by now, but I'm not positive.

  19. :happy feet: :happy feet: :hyper: :hyper: :shift:

     

    Just called the dealer. He is telling me my Edge is scheduled to be built this week and should be delivered during the week of March 12. Whoo HOO

     

    Can someone confirm this for me?

     

    Here the VIN: 2FMDK49C17BA81031

     

    Thanks :happy feet: :hyper:

     

    Marc

     

    P.S. Now got to get rid of that 92 Accord who has been my winter move since 1998 now while the Mustang peacefully rest in my garage between Dec and April.

    Looks and sounds about right!!!

     

    Receipt Date: 1/17/2007

    Serialize Date: 2/15/2007

    Segment Date: 2/15/2007

    Sequence Date: 2/16/2007

    Blend Date: 2/16/2007

    Produced Date:

    Gate Release Date:

    Ship Date:

    Arrival Date:

    Sold Date:

  20. I'm not sure if an order from December would still be on hold for chromes if I placed my order 1/22/07 and my Blend date is 2/22/07.

    I expect the vehicle to be built very soon. As a matter of fact I called Customer care today and they gave me a delivery date of March 5th.

    I have the chrome 18's and I would hope that their is no delay.

     

    I definitely get better updates and info on this board than from my dealer. (those guys don't seem to know whats going on in the factory)

     

    Ford ZM: Whats this about people leaving or fired on Wednesday? ;)

    Wednesday, February 28th is the last day for all salaried Ford workers who chose to accept a separation package, or those who were told to take a separation package. It is part of Ford's reduction in white-collar workers. Those who didn't take a package, and was offered or told to take one, will probably be "Let Go" within a few weeks. I believe the total number they want is around 14,000 people.

     

    Hourly workers who took packages also are leaving Wednesday too. Except hourly workers are split up throughout the year until September (contract), in order to maintain "operational effectiveness". Around 38,000 UAW workers signed up to leave, but are not obligated to leave even if they signed up. I believe Ford is counting on an 80% take rate, which I think is a little steep unfortunately.

     

    This really is an unfortunate time for many people because they are being forced to make a life-changing decision based off of rumor and speculation. Info is scarce, pressure is high, and morale is awful. Good luck to those who leave!!! I, myself, have chosen to ride this wave, with my 8 years of seniority, all the way in until it crashes. Hopefully in about 22 years :(

  21. My VIN is: 2FMDK49C97BA80600

     

    Can anyone help me track this VIN.

     

    Much appreciated.

    msemple,

     

    Here's what it says so far!!

     

    Receipt Date: 12/26/2006

    Serialize Date: 2/12/2007

    Segment Date: 2/12/2007

    Sequence Date: 2/16/2007

    Blend Date: 2/20/2007

    Produced Date:

    Gate Release Date:

    Ship Date:

    Arrival Date:

    Sold Date:

  22. Why am I not surprised that the customer relations person was wrong.? :wacko: Thank you!

    They might not be wrong. From another VIN I tracked, I know the system was updated yesterday. It doesn't get updated on a daily basis. They might have just started building it today!!! It seems to me that the way Oakville seems to be cranking these things out, you'll have yours soon. I know it's easier said than done but, be patient!! It will be well worth the wait :yup: !!!!

×
×
  • Create New...