gary712

no it does not.that unit has to be wired in under the drivers dash

it is there. more green/tan than green/brown

peter, which alarm/rem start do u have? is it a ford unit

or aftermarket? try to post a picture of the remote and

I will try to help you

ford remote start on the edge is programmed for no tach

to program key on foot on brake hold button till 3 beeps.

foot off brake push button 1 time 4 beeps push button again

5 beeps now touch brake on n off 1 beep look at LED on harness

push remote start fob 1 time n LED will go on. turn off key

all done

Now thats a horse of a different color.

2010 edge reverse wire-green/brown

drivers kic panel in harness going to

rear of car

Ford remote start does that so that MY FORD KEY works. The car

must see one of the ignition keys start the car for MY KEY to work.

It can be programmed to be over-ridden.ask your dealer to do it

reverse light in 14 edge blue/white in driver kick panel

pin #13 32 pin black plug

the steering wheel switch has to be changed for the sync to work.

after that it has to be rewired to work correctly.

if this happens on AM and FM stations ck antenna

for tach wire use a wire from from one of the fuel injectors.

pin 1 grn/blu gry/yel pur/gry yel/org brn or grn/wh

it sounds like the RS is programmed for tach. All the newer fords do not require

a tach signal. I am not familar with the viper. Just go back into programming and

set it for no tach or try voltage or hybrid or whatever they use that has a no tach

setting.

it sounds like it is locked out. You will need the dealer IDS (computer)

depending on what year your edge is you can have the dvd play thru your radio system.from the audio out RCA jacks plug into the RCA jacks in your car or the 3.5 mm audio jack. switch the radio to entertainment or audio out

the radio is powered up by the can-bus.leave it where it is

sync

most likely he does not not have a push to start limited otherwise he would also have remote start.best option is ford remote acess .it gives alarm. remote start cell phone activation of remote start and e-mail alerts if car is broken into

You need the new head unit,a radio harness, an installation kit, and an antenna adapter.

Nothing else.

it would require getting to the back of the outlet you want to rewire.cut the positive wire from the outlet and rewiring to fuse box or ignition switch. If you are not comfortable doing this you can go to a car stereo installation store and have it done.

the good news is if you have a 2008 edge it is a seperate tuner and not part of the head unit.the tuner is mounted in the hatch area on the left side under the plastic panel.If your radio is not navigation I have new ford radios very reasonly priced. PM me if interesed. Gary

try disconnecting battery for 30 seconds and reconnecting

you probably don't have it but to test leave drivers window open,lock doors with remote,wait 1 minute,reach in and open door from inside,if you have an alarm it will sound in about 10 seconds.

if it is in valet mode the LED will flash twice pause flash twice and keep doing this. To get out of valet you have to turn ignition on and off 3 times rapidly without starting car.

post a picture of the mirror

bluetooth was not available in ford nav until 2008. do u have a factory nav system?

all ford remote start units require dealer activation.they are all easy if you know what you are doing.if not leave it to a professional.

all ford units require an antenna in cargo area. console does not have to be touched