Dingo

Finally (after 2 years) got the front blinkers done and working.

 

 

 

I did mine on the car. Push the right (inside) toward the front of the vehicle, allowing access to the back of the mirror from the left.

Yeah, except no edges actually have that.

http://www.audiocontrol.com/17612/645207/OEM-Integration/LC2i-2ch-Line-Out-Converter-with-AccuBASStm-and-Subwoofer-Control.html

I'm using a billet one, but it's a Scott Drake cap, and I already owned it. I would rather have all OEM than half and half, though, normally.

Only the oil cap.

I had OEM heated mirrors. You probably do, too.

Yes, for the blinker.

They run off of the rear defroster.

They came already configured.

Of course! Never enough pics!

Test the new battery.

http://hooniverse.com/2013/08/16/braking-news-ate-super-blue-deemed-illegal-for-us-distribution/

 

My personal favorite brand of brake pads is Performance Friction (carbon metallic), but they do not have an application for the Edge. Have not had good luck with the HPS in the past, but will give them a go again.

 

StopTech does make the SS lines for the 07-10 Edge also, looking to see who might make the 11 & up lines. Yours custom at a brake shop, or DIY? Goodrich part # 13098 for 07-10, 13099 for 11 & up, per autoanything.com.

 

Even though visibility is pretty good with the Edge, I often am at busy intersections with no signals and curving roads. Would like to have confirmation before I get into traffic.

Theres a ton of blue on eBay for twenty bucks each. I made them myself, but at a hydraulic line shop. Need pics?

 

Impressive list, Dingo. Can you fill me in on where you got your Billet Oil Cap?

It was a leftover from another car. www.mustangsunlimited.com/itemdy00.asp?T1=SD107+01

The Mobileye isn't a camera that you can see the image from. You only get a number/icon display.

The EBC pads eat rotors. The hawks are a good balance.

"Illegal?" Since when and why? Oh, and the Ate Typ200 is the same stuff, but not blue.

Nobody makes stainless lines for mine, so I made them.

I started thinking about how much money I've put into my Edge, and got curious. Please post your mod lists here, and try to be as complete as possible. I'll go first, and I'm sure I've left some stuff out. I intentionally omitted cleaning/detailing/protective products and little dumb stuff like cell phone holders, chargers, trash bags, etc... I'll update the list as I think of more.

 

Stuff that’s done:

 

Suntek CXP tint (6% on front, 16% on rear and sunroofs, and 33% on windshield)

Morimoto 5Five 9005 Kit With Relay Harness And Capacitors

Morimoto 3Five Ballasts (Rear) With HID Bulbs And Custom Harness

Philips Daylight 8 DRLs mounted in painted OEM bumper lights

V-LEDs Triton 5K Switchbacks In Front Blinkers

V-LEDs Red Platinum Bulbs In Brake Lights and Rear Blinkers

V-LEDs 5K Mini Round Universal LEDs In Puddle Lights

V-LEDs 5K 1.5W 37mm-45mm Adjustable LEDs in dome, rear map, and cargo

V-LEDs 5K 10 LED 194 Bulbs In Front dome lights

V-LEDs 5K 6 LED Angled Flank Bulbs In License Plate Lights

V-LEDs 5k Vanity Mirror Bulbs

V-LEDs Brake light flash strobe module on third brake light

Upgraded LEDs in sill plates

Muth Signal Mirrors with heat and BLIS

Silblade UniBlades on front

Silblade Rear Blade

Mobileye 560 with display integrated into OEM rearview mirror

K40 RL360

K40 Diffuser EX2

Escort Passport MAX

Escort Live Hardwire Cord

Boston Acoustics GT-50

Boston Acoustics GT-40

Boston Acoustics GT-20

Boston Acoustics SL80 (4)

Boston Acoustics SE35 (3)

Boston Acoustics ISTS

JL Audio 8W7AE

JL Audio 8W1V2

Audiocontrol LC6i

Audiocontrol LC2i

Dynamat

CravenSpeed stubby antenna

Billet Badges Decepticon emblems on front and rear

Cheap eBay Decepticon emblems on centercaps

Billet Oil Cap

Redline Tuning QuickLift Plus hood struts

Chrome valve stem caps and sleeves

Toyo Proxes S/T Tires

Gorilla Black Chrome Wheel Locks

Metallic Black #M Film at top of grille

Painted Windshield Squirty-things

ELM327 Mini Bluetooth OBDII reader

Magnaflow Cat-back Exhaust

Green Filter

FilterMag RA300

Royal Purple XPR 5W-20

Cryo-treated Drilled and slotted Rotors (Diversified Cryogenics)

Stainless brake lines

Hawk HPS pads

Ate Super Blue Racing Brake Fluid

MGP Caliper Covers (Stealth Black)

H&R Lowering Kit

Engine start button from European Focus

Charcoal Cabin Air Filter

Gas filler hole locking pluggy-thing

License plate frame and cover

Fire Extinguisher (Super-important)

 

Stuff that’s here, but not yet done:

 

Clearwater Darla Lights

New lower air dam grille

New Charcoal Cabin Air filter

Blue Surface Mount LEDs to go in front and rear map lights (Supplemental for night driving)

200mm Blue LED fan (To go in OEM Subwoofer grille and cool amps)

Compustar 6000AS

Drone Mobile DR-2000

iDatalink Blade-AL

Sony GS series amplifiers (I have 6 new ones here, and am considering swapping them for the Bostons)

Aura Bass Shakers under seats

Onboard Battery Charger

Parts for new box for 8W7AE

Hella Supertone Horns

Whelen electronic air horn/PA and 100W speaker

Fitch Fuel Catalyst (Laugh, but it works)

 

Not here, and will be done later:

 

I’m not telling!

My baby got new shoes today! (For the second time, and ignore that it's dirty)

 

 

The right hip is new, but the knee is OEM. I was getting out and the wind blew the door right into my knee's path. The edge of the door hit me dead center in the patella. It hurt so forking bad that I started to tear up, and then started sweating and got nauseated all in under 30 seconds. It was weird as hell.

I use Green filters in every car I own, but I also like the AEM Dryflow S filters.

I drove mine today, and then accidentally slammed my right knee into the edge of the door. It hurt so bad that I actually got nauseated.

Hmmm. I need this for my 12 Edge Ltd AWD! Can you provide me with any info that would help in this direction?

Thanks ...

Call muth. They'll make them.

A guy at Cherokee named John. I would never take another vehicle to BH for service again.

Mine just started stalling out one day. It would die, followed by the wrench, and was still running, but barely, and quite rough. When I'd shut it down and restart it, it purred like a kitten, and then I could drive another 60-300 feet and it would do it again. In the 3 miles home, it stopped 16 times. I pulled the codes and had a P2111 and a P2112. I called the dealer and offered to remove the TB, take it there, and swap it out, but they said that warranty would only cover it if they swapped it. I had Ford roadside assistance tow it there, it was swapped, and I was out of there. Less than 2 hours from initial malfunction to back in my driveway, including the tow.

 

I got a new one a couple weeks ago.

Which wires for -ve & +ve ??

I don't remember. Your dealership has a wiring diagram. Ask them.

 

Resistance is futile.

http://www.cnn.com/2013/10/31/us/uss-zumwalt-capt-kirk/

Mine are whole new pieces of glass, hence the expense.

 

Yes, I did them myself.