-
Posts
2,020 -
Joined
-
Last visited
-
Days Won
54
Content Type
Profiles
Forums
Gallery
Posts posted by Dingo
-
-
See video above.
-
I filmed this at the gas station tonight, while waiting for my charmer of an ex-wife to bring my son back from her visitation.
-
Just an interior beep and a message on the left screen of the cluster.
-
Yup. Same key as hers, even, except that the internal key in mine is a tumbler key and hers is laser-cut.
-
It's not a Ranger chassis. I had an 07 sport trac, and the edge kicks it's ass in almost every way. What engine did the edge have that you test drove?
-
Oh, I thought you got ones like mine. In that case, I change my resistor answer to, "I don't know."
-
My wife's 14 escape does that honk thing, but but mine doesn't. Maybe it's a post-'11 thing.
-
-
Where did you get them & for how much?
-
Dingo, i am planning to do the same, received the turn LED's this morning. need your help on following:
1) Do it need resistor? if yes, what resistance will be ok?
2) where to connect the wires? is there any nearest location in the cabin?
Thanks in advance
1. No.
2. Driver's side kick panel.
-
Plug the factory headlight into the ballast connector upside down. See if that works.
-
I lived in WR for a couple years.
-
It's a few exits south of Macon. It's where Cafe Risqué used to be. Mrtwohands is most likely Air Force.
-
There aren't many. Where in ga?
-
All one piece.
-
No. Third brake light to relay to brake lights. Front blinkers tapped in kick panel and run to back with relays.
-
Except the vleds tritons...
-
Don't put EBCs on an edge unless you love buying rotors. Try Hawk HPS. And you don't have to change them all at the same time, but it's a good idea.
-
Like I said, a single relay in the kick panel would easily fix it.
-
It all depends on the drivers. The factory lights dim up to full and back down. Most led drivers have a problem with that. If you put a relay on them, they'll work flawlessly.
-
Turn them off. The new lights will be the drls.
-
It would be fairly easy to make them function as intended.
-
Go with a compustar ft6000as, a compustar slice remote, and an idatalink blade-al.
All canbus and upgradable .
You can also add the compustar drone system for cell phone control, gps tracking, and geofencing.
-
Adding a push button start with key fob?
in Alarms, Keyless Entry, Locks & Remote Start
Posted
Wow. A compustar ezgo kit is way easier.