-
Posts
278 -
Joined
-
Last visited
-
Days Won
6
Content Type
Profiles
Forums
Gallery
Posts posted by CARR142
-
-
Sorry Folks, I meant to say, That I always mark tires before having them rotated.
My bad.
-
Does it look like this?
-
4 APIM and the right Tech and all's well with me. This was with 2011 MKx back in the early days of Sync 2.
-
Dealers or independents, "I" always mark tires and check if rotated.
(DAMHIK), don't ask me how I know.
-
-
18 hours ago, Mkeefer01690 said:
The PRNDM letters on the console do not light up,
-
-
Right "Ok" button
- 1
-
7 hours ago, WWWPerfA_ZN0W said:
could be right about the purge valve if it is flooding the engine with vapors on first try. check if it holds vacuum with engine off.
yes, all fobs have batteries and transponders. if the transponder is failing and does not communicate with the PATS ring in the vehicle, then you will not be able to crank at all. the battery I believe is for remote functions, maybe also for transponder functions but not sure on that.
You could try: "The Vehicle Does Not Start With The Passive Key In Certain Areas Within The Vehicle But Starts Using The Passive Key Backup Location"
-
Consider this issue.
-
23 hours ago, litlbiddy said:
that's it. I hate this.... now to find someone to do it.... I believe this is the part he used? I would hate to pull it all apart and realize it is the wrong part
http://www.sunroofdoctor.com/2007-2014-Ford-EdgeLincoln-MKX-Sunroof-Guide-Repair-Kit_p_112.html
Above Link no longer available.
Use:https://www.facebook.com/thesunroofdoctor/
Quote -
ENGINE COOLANT OVER TEMP — Displayed when the engine
coolant temperature is excessively high.Page 26
-
-
"And Away We Go" Best Wishes To you.
- 1
-
3 hours ago, Xtra said:
finding my car sitting on milk crates without wheels
I been there before, I would have like to see the expression on my face. Got new wheels, tires, locking lug nuts, plus towing for $250.00 Deductible. Insurance paid Dealer $5134.00.
Tires had 26000 miles at time. Two Rims had curb rash.
- 2
-
He doesn't say anything about programing it after the install. You could ask in the comment section.
Best Wishes!
-
Try opening the link in new private window using Firefox.
or
New incognito window using Chrome.
or
New Inprivate window using Edge, (Windows)
Best Wishes!
- 1
-
Consider This:
And this:
Ford Drive Cycle Information
For all other Ford VehiclesPre-Conditioning Requirements:
· Cold soak the vehicle for 8 hours
· No DTCs present
· Fuel fill between 15% & 85 %
Driving Procedure
1) Start the vehicle and idle for four (4) minutes.
2) Idle the vehicle in drive for 40 seconds (neutral for M/T).
3) Accelerate to 45 mph, using ¼ to ½ throttle (M/T stay in second gear
for at least 5 seconds). Accelerate for at least 10 seconds and shift
through to 5th gear.
4) Drive with a steady throttle at 45 mph for 30 seconds.5) Stop the vehicle and idle in drive or neutral for 40 seconds.
6) Drive at speeds between 25 and 45 mph for 15 minutes.
Use ¼ to ½ throttle accelerations. Include the following conditions:
· At least 5 stops with ten seconds of idle time.
· At least 3 steady speed sections of 1 ½ minutes duration.7) Drive the vehicle between 45 and 60 mph for 8 minutes (use high gear).
? Maintain a steady speed between 45 and 60 mph for 5 minutes.
9) Drive the vehicle between 45 and 60 mph for 8 minutes (use high gear).
10) Stop vehicle, idle for 40 seconds.
-
AJRoo, Did you disconnect the battery before/during this repair?
-
Blufish312, Welcome, The painted section is a separate part of the mirror. Take care when trying to separate from lower section or you will break the clips. The lower black section isn't available as a separate part. You could buy a mirror, new or used an switch out the top section to avoid painting.
-
FYI,
My 11 MKx won't remote start with the hood open. Holding down the hood switch it will start.
-
5 hours ago, flymore said:
The only consideration was my Edge was on a ramp, but that's all I have.
Anybody have any thoughts?
a ramp = 1?
I would think that the vehicle should be level.
-
18 hours ago, fit1446 said:
"i can get into it with Forscan but it would be a task to do it by myself."
Doing it with Forscan is easy, Forscan Lite with your phone, Follow the instructions. I've done on two of My vehicles, from the drivers seat. Best Wishes!
- 1
-
6 hours ago, WWWPerfA_ZN0W said:
Did you go oem?
Yes Sir!
How do I align front bumper? 2014 Ford Edge
in Exterior & Body
Posted
I hope this helps.
1. Loosen all the mounting hardware.
2. Use some shims on the inside front of the bumper between frame and bumper.
You want to push the bottom space out, which will push the top space in towards the fender.
Where you place the shims is optional.
3 Then tighten all the mounting hardware.
Tedious but rewarding results.
Best Wishes!
What you use for shims is up to you. I used so hard rubber trimmed to size.