flyers27

do i have to bring this back to the dealer or is there a "save settings somewhere i am missing. Im pretty tired of bringing this to the dealer between the sync, the TSB for the ticking at cold startup, and the TSB for the slipping transmission...

i dont mind it coming on while entering or exiting the car, i just dont want it while im driving. Especially at its brightest setting! If its set for off it should turn off when all the other interior light dim out....

mine comes on when i open the doors as a courtesy light like yours, but it stays on while im driving. I dont want it on while im driving... Before the update if i had the ambient lighting set to off, it would come on when the doors opened and shut off when all the other interior lights dimmed out. Now it just stays on.

please delete, posted this in sync forum thanks

I recently recieved the sync update from the dealer and noticed a problem with the ambient lighting. I turn the ambient lighting to off and everything will be ok. After a couple of times of going in and out of the car (starting and parking it), the ambient lighting will turn back on to the baby blue color and full brightness. Anyone have this problem or know what i can do besides bring it back to the dealer? This is really annoying because i dont want the ambient lighting on at all and it just comes back on... thanks

I recently recieved the sync update from the dealer and noticed a problem with the ambient lighting. I turn the ambient lighting to off and everything will be ok. After a couple of times of going in and out of the car (starting and parking it), the ambient lighting will turn back on to the baby blue color and full brightness. Anyone have this problem or know what i can do besides bring it back to the dealer? This is really annoying because i dont want the ambient lighting on at all and it just comes back on... thanks

mine has done the same thing at cold start-ups last winter. (maybe 4 or 5 times) Only last for a few seconds. As soon as it does it this year i will be taking it in because i think this TSB will apply. tsb12-01-17.pdf

Has anyone had this tsb performed? I experienced the ticking sound on startup last winter on my 2011 and am just waiting for the weather to cool down and for it to start up again...

thanks cjd3, looks great.

cool thanks

i guess im just going to get a non folding one that has an angle to it... gotta try and find one with more than a two inch rise.

Oh man, i didnt realize thats what you were talking about when you said it was even with the exhaust pipes... The DeeZee looks like it rises about two inches already: http://www.etrailer.com/Hitch-Cargo-Carrier/DeeZee/DZ760083.html maybe it could work, either way this is getting very confusing.

On the etrailer.com website, its indicates that the Curt C13067 has a 5 1/2 inch gap from the center of the hitch pinhole to the outermost point of the bumper. The website also states that the DeeZee DZ760083 folding cargo carrier measures 6" from hitch pin hole center to edge of carrier when folded. So, this setup should work giving a 1/2 inch gap when the carrier is folded up... Question is does the Draw-Tite have the same 5 1/2 inch gap or is it smaller, because i like the fact that it only uses four bolts and there is no need to drill into my frame? Or i may just use the Curt and not install the extra two bolts that you have to drill for. I really dont think it will ever end up being a problem because i will never be towing with this, all i will ever be using it for is with the carrier when vacationing. Anyone have thoughts on this?

im not worrried about being able to drill the holes, i just dont want to drill holes in my frame if i dont have to... would love to know if anyone has the draw-tite and if it hits the lower bumper on a 2011?

Does anyone have the Draw-tite 75709 installed? Just curious if it hits or pushes the fascia up at all? Was going to get the Curt, but i dont think i want to drill holes in the frame for the extra two bolts it uses... Also, anyone have a folding cargo carrier? Just wondering which one will not hit the bumper when folded up? I read the DeeZee DZ760083 is the only one that will not hit the bumper when folded up... Anyone think i could install the Curt and just not install the bolts that have to be drilled? It would, in essence be just like the Hidden hitch and Draw-Tite beacuse they would all be just utilizing the same holes. i will only be using the hitch with the folding carrier, i will never be towing with it.