Juancal

Sorry for the delay, I have to remove the controls to access the part number . I bought the part from eBay from about $150.00 ford list price $900.00 plus .it was from a 2012 Edge SEL ecoboost with 12K

Sorry for the delay, I talk to the my service Advisor and they are going to validate if all Edge has the same AC components, in order to proceed to reprogram the module I keep you posted.

Hi guys I am planning on install a Infinity Basslink on my Edge and I want to know if the Base radio system with Sync has any RCA output. also I am going to replace the OEM speakers with Infinity Kappas.

You need to change the whole shift knob I did mine and looks totally different and Also change the passenger and driver side vent from non chrome to chrome really change the fell on the interior the SE has the black stripe but the SEL and above has the chrome look and feel here are 2 pics one of the SE and SEL, I found the parts one e-bay cost me about $75 bucks and about 1 hour of my time. This is the SEL Here is the SE

Yes, but before I tap into the wires, I disconnect the plug from the bulb socket and push the strip light cables trough corresponding color in the connector an test it a couple of time, the simply sun the cables, put the lights and splice in to the cables you can fin som cable splicers in Auto zon Advance auto parts or pep boys hope this help I did not document the installation process by bad..

Hi there I did mine, as you can see the conectors that you bought on ebay has a color code, look at the same color code wires on the parking/signal lights on the head light and basically you can splice on them. Attached you wil find the instructions I follow "The conector may not be there , if it was there it would be a two wire conector , with a yellow/blue wire and a black/gray wire ,,, it should come off the same harness as the headlamp and the other parking lamp in the front ,, if you cant find the conector, then you can tap into these same wires at the other front parking lamps and run them into your add on lamps , and it should work fine, due to this is how its wired from the factory"

Just an update I Already install the Automatic Dual Zone Climate control and the dash sensor, all the controls works fine and also the system start to display the temperature form each side and fan speed on the radio multi display screen. but when I enter in the Auto mode the Air conditioning stays on the current fan speed and closes the front vents and star blowing air from the dash and door vents, when I adjust the temperature the Air conditioning reacts accordingly but doesn't change the blending mode or fan speed. Also notice that all the blending doors works independently that means that the only thing were missing the BCM reprogram or Activate the feature with the Ford IDS tool. Any thought on this?

Hi there, I got a Ford Edge 2013 SE and I want to change the Climate control from manual to Automatic with dual Climate Controls, After looking at my Edge I notice when I change the temperature from cold or warmer the the passenger side take about 1 second to make the adjustment driver side also I notice when I turn off or on the A/C blending doors on the passenger side close or open 1 or 2 seconds after the Driver side. I also read across some web site that all the features are already programmed on the ECU, so you only need the appropriate sensors and controls. this just apears to be a plug and play MOD. I already Purchase the Dual A/C Control sensor for the Dash, but before I purchase the A/C Control I like some feedback on it.