IcyFridge

I am really wanting these out of my basement! I tried to delete my older post, but couldn't figure out how to, so here's a new one. Need $ for winter tires for my Subaru, and these need to be gone first.

245/60R18 Wildpeak AT Trail. ~12k miles and still like new. No damage/plugs. These are snow rated as well. Asking $200 if you can meet me around Rochester, NY area. 

UPDATE: Wheels have been sold locally.

Tires are up for grabs for $300. I can meet you around the Buffalo/Rochester/Syracuse area if needed.

Tuner is still available and I can ship it if needed.

More pictures.

Post updated! Tires and wheels have been unpaired. PRICES DROPPED
 

So... my transmission decided to act all crappy again, so I traded in my Edge for a Crosstrek (6MT for the win!). I'd love some help getting this stuff out of my basement and into a good home!

First up - Livernois MyCalibrator Touch tuner that can be loaded with new tunes from Livernois. I will ship this anywhere in the CONUS for $90 PayPal. $80 PAYPAL

Second up -

• Method MR503 (satin black) : 5x108 bolt pattern and 18x8 40mm -- will fit Focus ST, Edge, Bronco Sport, Maverick, Fusion, etc... These retail for around $300 each and weigh only 17lb! Asking $600. Can meet you around Rochester/Buffalo/Syracuse area.  THESE HAVE BEEN SOLD.

Third up - 

• 245/60R18 (OEM size) Falken Wildpeak AT Trail -- rotated every 5k miles (~12k miles) and barely show much wear. Best tire I've ever used and actually will use this money for a new set on my Crosstrek!
• TPMS included
• Lug nuts included
• Asking $300. $200 - please get these out of my basement. Can meet you around Rochester/Buffalo/Syracuse area. 

Please DM me, as I will get email notifications that way.

Sold my Edge so I’ll be posting up my method/Wildpeak setup soon. 

My Edge started jerking and mis-shifting again but even worse than before. Out of my warranty period so I’d have to pay for some clunk in the suspension and smell of coolant inside. Plus Ford wouldn’t give me a loaner anymore so I’d have to pay for a rental for however many months it’ll take to fix the transmission. Traded the Edge in for a 2023 Crosstrek 6MT within 2 days and couldn’t be happier. 
 

Will be posting my Livernois Tuner and Method/Falken combo for sale soon. 

Was just curious if there are any fellow forum members on here that are from the WNY/Finger Lakes area of NY?

Just wanted to check if I should even put up my Method/Wildpeak combo for sale here. Plan to trade in my Edge soon due to the terrible transmission issues.

23 minutes ago, enigma-2 said:

Listed as a WY21W in the owners manual. ...?

Egads, you are right. The headlamp housing says otherwise. I can't find any identifying marks on the bulbs themselves. When I have some time, I'll pull a bulb and compare with WY21W pictures online.

On 9/4/2022 at 7:18 PM, enigma-2 said:

This one?

Philips 12071B2 Light Bulbs Glass Base WY21W Pack of 2 in Blister Pack https://a.co/d/7brOrGe

Yep. Looks like those! But they're labeled PSy24W on the headlight cap.

How are the bull bars mounted anyways?

On 9/1/2022 at 9:28 PM, enigma-2 said:

How about these?

 

Alla Lighting PG20/4 Base 12188NAC1 PSY24W LED Bulbs Car Front Turn Signal Lights Bulbs Replacement, 6500K Xenon White https://a.co/d/6O5RW3l

Those still have a plastic base on them. I need to snap a pic and show you what I’ve got. 

Would these work on a 2019+ 2.0?

Four tires and wheels just sitting. 

Popped one skin on so you can see what it looks like. I know they’re dirty but they’ve been sitting for a while. 
images too large to upload, so here’s an imgur link. https://imgur.com/a/uH0lEwZ

Alright. After my kids go to bed. 

Just putting out a feeler to see if there's anyone local to Rochester/Buffalo/Syracuse that would like a complete set of OEM 5 spoke SE wheels, OEM Michelin tires, and black wheel skins off of my 2019 SE. About 10k miles on the set and they're undamaged. TPMS is untouched as well. Tread is still pretty new as this was mainly highway miles. I switched to my Method/Wildpeak setup and have no need for these anymore.

I think I'd ask $600 OBO for the set, as I just want to get them out of my basement. If there is local interest, then I'll put up some pictures as they are packed and wrapped in the basement at the moment.

I'm willing to drive up to an hour away from Rochester to meet if needed.

Gosh I love the look of that Lund, but that seems like a very custom job. I don't want to be hacking up my Edge that much.

I did look the bull bar route, but hate how they hang so low.

The PSX have a plastic base. On the 2019, there's a plastic base that screws out of the headlight and then the glass bulb comes out of it.

I've been craving some extra lighting on my 2019. Has anyone found solutions for mounting light pods or a light bar (small) on these Edges?

I've seen the license plate mounts, but I'm not sure if they will bounce around like crazy when on back roads. Just seeing if anyone has had any luck.

19 minutes ago, MLTEdge said:

New torque converter could still be bad, or installed incorrectly. My issue was the worst right around 40 mph when letting off gas, or adding with a light pedal. Never hurts to double check since you are under warranty. Had a Ford ranger xlt, Ford rebuilt the tranny 3 times in 3,000 miles because the mechanics kept getting it wrong.

Yeah. My initial issue was at 40mph with a shuddering at extremely light throttle. Right now, with some friction modifier in the transmission to thicken up the fluid a bit it's been running fantastic outside of the 13 mph thud. The thud used to be pretty bad the first week I got my Edge back, but now it's getting fainter. This is why I'm waiting for another 3k miles before my next oil change. Might have them check the RDU/PTU fluid levels to play it safe at 30k miles and ask for it to be done under warranty.

20 minutes ago, MLTEdge said:

Also check torque converter. I had a bad one on my old Titanium right from delivery. Dealer kept telling me software update will fix it. Kept getting worse until it felt like I was being rear ended . Finally found a new dealer, and just before warranty was running out got correct diagnoses and they replaced and rebuilt entire tranny since it was damaged from due to condition going on for so long.

My torque converter was replaced for my shuddering issue, so it can't be that really.

It feels like it's coming from the rear end and only seems to be happening when slowing down from 40+ mph. I'll have the dealer check it out next oil change as I want to drive my Edge after being away from it for 4 months.

2 hours ago, Breez said:

Engine

..

It can be both. It's as if the transmission is not sure what gear it needs to be in at some speeds. Since I had friction modifier added to my transmission fluid, it hasn't shuddered much. Only once in a blue moon.

The downshift thud from 3rd to 1st is a new thing and will get that looked at soon.

2 hours ago, WWWPerfA_ZN0W said:

try to get the pcm reprogrammed

https://drive.google.com/file/d/1_tV0p90M85nN1S99BRujXA620dqIfQ6l/view?usp=sharing

Already done several times during troubleshooting of the initial shudder problem.

After having my edge in the shop for months for transmission shudder, it's nearly perfect now aside from the thud. It feels like the 3rd to 1st downshift is just rough.

If I don't drive more than 30 mph and stop, it's fine. If I drive above 30 mph and stop softly or gradually, it will thud. Feels like something hitting the back of my drivers seat. No rpm fluctuations, just the random thud. It was violent before, but calmed down a bit. Plan to have the shop foreman at Ford drive it and see how long it's gonna have to be in the shop this time LOL.

My 2019 has the gloss black center console and it's scratched to hell due to sand from my beach volleyball team. Does anyone know if the new matte silver versions from the 2022 will work on it, or am I limited to using vinyl?

I got a set of new golf clubs and want to keep them away from prying eyes. Ain’t paying $155 for a cargo cover so I wanted to see if anyone here has one they’d be willing to part with. Must fit 2019 Edge. 
 
Not sure how much shipping would be but I’m available to drive up to 1 hour away from Rochester NY if needed.