Idahof150

Specifications are for an 08 Edge 3.5 : Caveat emptor! Oil pump bolts : 89 inch pounds Water pump bolts : 89 inch pounds Oil pan drain plug : 20 foot pounds Right hand primary timing chain bolts : 89 inch pounds Left hand primary timing chain guide bolts : 89 inch pounds Primary tensioner bolts : 89 inch pounds Left hand VCT housing bolts : 89 inch pounds Right hand VCT housing bolts : 89 inch pounds Engine oil filter : 44 inch pounds then 180 degrees

...also replaced the oil pump but can't find torque specs...

Water pump blown apart, OH!, I have a picture of that. So, reading through all the threads, I think, about what to replace, I still haven't been able to find the torque specs for all the bolts I've been taking off. I do have a calibrated elbow. I was able to vacuum most of the old water pump out by sticking the 37 amp shop vac to the timing gear side of the block and a water hose to the top of the heads. Used the same process for the heater core and radiator. Recovered about 70% of the old impeller. That was alot of water. The local Ford dealer's parts department has been working with me on the cost with $390 spent on parts. They didn't have the secondary tensioners in stock. It's a damn good excuse to be hold up in the garage with an adult beverage. Torque specs would be greatly appreciated. Imagine having a 37 amp shop vac! Me too.