blumi

We live in Erfurt, state capital of Thuringia. (probably unknown for people overseas).

Yeah, since Spring has sprung ;-) and the weather was nice, so we decided to have a meeting at a local fast food-parking lot. And, what can I say, really ALL Ford Edge of our city were there! Yes, BOTH of them! Finally I got the chance to inspect Spacy73's all new 2011 (or is it a 2012???) Edge Sport. Very nice ride you have! Since Spacy73 is a car audio professional, I got the chance to have my home-made audio installation fine-tuned. Thanks man! Blumi

1st or 2nd generation Edge? I could provide a pic of mine (2007 -> 1st gen.)

They ride fine. Only slightly stiffer than on the factory 17 inch. MPG went down a bit, though.

They are still in the factory wheels sporting snow tires.

Hi, I'm having problems activating the new TPMS sensors I got with my new rims. I ordered DORMAN 974-026 sensors and an ATEQ VT15 programmer. The sensors react, but very sporadically. I did not get all 4 sensors programmed in one move, since I have only 1 minute per wheel in training mode. Do you think, the distance between outer tire and sensor is too far?

20inch Diamo 39 Karat white chrome wheels with 255/45's Pirellis. Waddaya think?

That's why some other cars switch from MPG (or Liters/100km) to gal/hour (or Liters/hour) while standing still.

@kempie, bbf2530: Thanks for the information. I didn't think of this functionality. @Wilson: According to the pictures in the linked PDF, a textured area is one method to achieve the signlight.

I don't think so. It's about the spherical glass lens inside the headlamp housing. Bastian

Apparently, the headlight lenses of the 2011 Edge have been developed by a company in a small German town near from where I live: Press release "Docter Optics" Can someone explain what they mean with the "signlight function" they included in the design? DRLs? Bastian

I noticed the weak fan on my 2007 also. But I think this is because the vent openings are pretty large. If they were smaller, the air would come with more force out of them. In other words: the amount of air is okay and sufficient, the air speed isn't. Bastian

Also, you have to connect pin 19 (Blue/White wire) of the vehicle connector to ground! This is, what I forgot in my installation back in the days. It's mentioned in the instructions, but it's overlooked easily.

Did you connect the red wire to +12V switched? Bastian

Maybe it's designed after the human brain: left side controls the right extremities and vice versa Bastian

No. The physical headlight switch doesn't power the headlights directly. The wires coming out of the light switch contain control signals going into the Smart Junction Box (SJB), in which a small IC and a few relays give power to certain lights. Knowing problems like this from the Mustangs (2005+), I suspect a problem in your SJB. Bastian

Drag Radials in the FRONT?!?

I know this pic from Steeda, that's what led me to those rims. But 22" are way too much for my taste. At least on the Edge. I also would like to see them on an otherwise stock Edge. 255/45 R20 would be a tire size with ZERO difference regarding circumfence to my 17" stock wheels (235/65 R17). But would fit a 255 tread with to a 8.5" wide rim? Bastian

PS: here's a pic of the rim

I am looking for new shoes for the Edge and found "Diamo 39 Karat" rims pretty well matching, especially in 20 inch chrome trim. Got anyone a set of these and can provide a picture? Also, what tire size is suggested, given a rim dimension of 20 x 8.5"? Regards, Bastian

I suggest to get your rear wheel alignment checked. Bastian