Tom Champagne

SOLD!!!

Used for 6 yrs. Am selling my wifes Edge this spring. $50+shipping. Located in Michigan.

I have a pair of used H&Rs if youre interested. I'm located in Michigan

I have a pair of H&R springs for sale. they were on my wifes car for 6 yrs. I'm located in Michigan

Thanks for the reply. I'll look at the hoses and check them out.

My wife's 2007 Edge SEL has almost 80K on the clock and was wondering if I should change hoses and belt(s) at this time. a mechanic friend told me just the belt(s) and flush cooling system. Any thoughts? Should I stay with OEM parts? Thanks in advance.

Never mind. After some research there isn't anything I can do. The turn signal indicator is part of the gage cluster. I'll live with it.

Before anybody flames me I would like to know if I can get a different turn signal indicator that's not so loud? I'm not old but it is the loudest of any car I've owned TIA

You must not be from Michigan. You're already going to watched by the keystone cops when you place your order

+1 on Stoners...always good luck with this product

Well the new strut mounts did not solve the creaking issue. I've tried all of your suggestions...I also neglected to say that when I got an alignment after the initial install,I had to get new tie rod ends because of wear(according to the alignment shop). Could these be the culprit? If not,I'm going back to stock and see if the noise goes away.

Right a 60K. thanks for the info. I'm getting new caps installed in a couple of weeks.

After all summer of hearing the creaking,I finally took the car back to the mechanic who did the installation and he had it for a whole day and determined it's the driver side strut bearing cap. I bought new caps(oem Ford)h new shocks when the springs were installed. I'm hoping this will solve the creaking noise for good. He even took the caps apart and greased them,but to no avail. I'm crossing my fingers this time.

The noise comes from turning while going real slow...as if in line at a drive-up window. It doesn't happen when going straight. I had the car aligned 3 days after the drop and the noise appeared immediately. Seems to be coming from the pass side front. Which bushings are you referring to? Thanks for the reply.

Well it's been a month now and still have the creaking noise. Could the whole assembly be installed improperly? I trust the mechanic that did the install...