97novi2k

Yes that is the strut tower brace updated for items sold and added CPE RMM

Looking to sell a few parts taken off my 2017 edge sport before I traded it in. Car was running E85 with larger turbos. All low mileage l, maybe 1-2k XDI HPFP Evo - Sold Livernois Tuner - $100 SCT X4 - Sold TTCR Engine Brace - $100 CPE RMM - $110

I haven’t priced it all out yet, will do it tonight and post up the results

@Xtra have you heard much about the BMR suspension parts that should work for the edge? Thinking of trying it as I’ve done everything else. FYI still under mustang part numbers though for the 2.3, I need to call

Got my tune done but no dyno numbers yet. With the E85 and stage 3 turbos the car moves lol. Turbos were a nice upgrade and spool quick

I guess we shall see. Right now I’m tuning with E90, stock injectors, and XDI HPFP and so far so good. Pulls like crazy lol

Those are the same ones I ordered l except I went new. Mine are going in next Wednesday

Which turbos are those? Im Getting ready to install my stage 3s but I’m also going E85. I’m using ZFG for the tuning

Not yet, I was going to do it on Monday and when I looked at the strut mounts I realized the new ones I ordered didn’t have the bearings so I have those coming in tomorrow. Figured I would just do it all while I’m at it

Thought I would post this here also l. Has anyone looked into the CRP Stage 3 turbos. I am thinking this might be a good option and try these out on my build, was surprised they aren’t mentioned here but I could have missed it. i wonder how they compare to the comp turbos, I would assume very close. https://crpengineering.com/product/2015-2019-fusion-edge-2-7l-ecoboost-stage-3-40-6mm-upgrade-turbo-set/

Has anyone looked into the CRP Stage 3 turbos. I am thinking this might be a good option and try these out on my build, was surprised they aren’t mentioned here but I could have missed it. i wonder how they compare to the comp turbos, I would assume very close. https://crpengineering.com/product/2015-2019-fusion-edge-2-7l-ecoboost-stage-3-40-6mm-upgrade-turbo-set/

Yeah no idea why it is taking so long if they are drop shipping. As you can see they can come quick. SW did refund me quick so at least that part was nice. on a side note is everyone replace the strut mounts with OEM or any aftermarket ones? I was just planning to run new OEMs but thought I would ask

@Xtra @onyxbfly My Bilstein front struts arrived today lol. I ordered from Summit Racing last Wednesday and the front Struts sre sitting on my desk. Really weird I got no shipping confirmation or anything but it’s the right parts. I will cancel my order today from shock warehouse. Why they don’t have them I don’t know, clearly they are in stock so why don’t they have them. Got them less than a week after ordering from Summit

Hello, thought it might be a good idea to make a few updates to the first post to help everyone out. I admit I didn’t research the RMM and thought the CPE was softer when I ordered it, oops ? RMM: CPE - 65 Duro UP - 60 Duro Downpipes: Zury Fab - 240-539-0087

Hello, Does Zury still well the Downpipes? The number listed is not working anymore and the email didn’t work for me. I would like to purchase a set. I tried Facebook but haven’t heard back on anything. also what anti-foulers or mini-cats has everyone been successful using. I saw it mentioned that they have been used but didn’t see the brands

Thank you this is all very helpful and you are right it’s not a noise but really a “hum” that I hear and it’s pretty substantial. That review link was perfect so thank you. I will probably order the UP one and do a review on here. I think Special should update the main thread to change the duro ratings of each to what they are now. Here it shows the CPE as less.

I don’t know if it makes a difference but they say it’s 65 now for both. It’s just weird cause the vibration isn’t bad in the cabin but the noise I don’t know if I can get used to it it doesn’t lighten up after a few hundred miles Would there be any big difference going with the UP RMM that is 60?

Thanks for the advice? I called last week and they didn’t have any so maybe they found one for you.

Not sure if it’s all Covid but getting performance parts for the edge is not easy, I could only imagine the pioneers to even get to this point. I’m not patient and hate waiting lol. All parts below ordered and wait times Bilstein Front shocks - 3 weeks UP Intercooler - 1 month ADDCO sway bar - 2 months TTC Strut Brace - 1 month

Bump, here’s to hoping someone has one. Called UP and they are maybe a month away still

Hey Xtra, I called Summit Racing and they drop ship direct from Bilstein. I ordered some to see if they will ship sooner and will just cancel whichever ships first. Like you said I also called Bilstein and they said it’s in stock so not sure why Shock Warehouse doesn’t have any yet but either way I’m glad to get them soon!

Just curious for anyone else with the CPE RMM but did you have loud cabin noise at first? Vibration isn’t bad but the noise pitch is awful. I only have 10 miles and know it should reduce as they say drive a few hundred miles but curious how much it softens up noise wise

I just installed my CPE RMM today. Install was super easy and took maybe 45 minutes. Would have been quicker if I wasn’t stupid and kept trying to put the bolt back in the same side which made no sense. also my torque wrench I guess was broken, I torques the 15mm bolt probably way past 85 ft lbs but oh well, I know at least it isn’t coming loose. NVH at idle is noticeable but minimal. I will say the CPE piece is nicely made and overall a nice addition

Haven’t arrived yet. The only place I could order from was shock warehouse. I called tire rack and several other places but nobody would help me out. I was told they should arrive first week of September. They have an order in and are just waiting for them to come, I guess they don’t drop ship from supplier to you

I don’t think so, I didn’t know about the group but. My price was around 220 shipped. How much are you paying?