Jump to content

Ian Nathanson

Facebook Member
  • Posts

    13
  • Joined

  • Last visited

About Ian Nathanson

Ian Nathanson's Achievements

Newbie

Newbie (1/14)

  1. Mine stalled while i was turning a corner before it stalled i was having acceleration issues after the fix everything is fine
  2. Could be purge canister valve easy tem min fix and $70-100 for the part at any auto parts store. And since you have to remove the aor intake hose to get to the part which is on the fire wall it would be a good idea to clean you throttle body
  3. The dearler will charge you anywhere from $210-300 for this fix here in fla
  4. This sounds like a purge canister issue its a easy fix two bolts and the part which cost $70-100 at a auto parts store and also since you have to take the airintake hose off to get to it ( the part is on the firewall) it would be wise to go ahead and clean your throttle body.
  5. Check out mac t on youtube he has saved me tons of money with his diy fixes that would have cost me thousands at the ford dealer
  6. This part if clogged stops gas from getting to the engine
  7. Could be the purge canister valve its a ten min fix and the part cost anywhere from 70-100 for the part at any auto parts store and while your at it since you need to take the air intake off clean you throttle body.
  8. I followed a video on youtube where it said to spray electrical parts clear directly in the side of thr door where the latch is i did it and have not had the door ajar light since and it saved me the couple hundred dollars ford wanted to charge me and took only a few mins
  9. After my fix i had no further problem also since you have to take the airintake hose off to perform the procedure it would be wise to go ahead and clean your throttle body.
  10. This could be the purge canister valve i had the same problem it happened about twice then one day my engine just cut off. The part is a ten min fix and cost about $75-100 at any auto parts store. Hope this helps.
  11. I noticed similar problem after i jumped someone.i noticed the connection on the positive side with was lose not the actual connection but the other thing thats connected to the connection it was causing a short and my info display was going black and then back on again. I made sure i tighten the bolts. Ford told me that the part thatcis connected to the possitive is part of a charging system.make sure everything is tightened be careful not to strip the bolt.hope this helps. Also if you find your self stalling you might have to change the purge canister valve dont let the dealership rip you off tgey quoted me $210.00 for tge job the part cost about 75-100 at any auto parts store and takes about ten mins to change.
  12. I had the same problem it turned out to be the purge canister valve at the dealer its a $300 dollar repair but if you have $150 and ten minutes you can go to autozone and buy the part its on the fire wall and has two bolts holding it in and one hose and a electric connection after o changed mine i stopped having the issue hope this helps
  13. Does anyone have any pictures of the locations of the actuators if so i would really appreciate it my heat went out and im trying to avoid the dealership (no warranty thank you
×
×
  • Create New...