kevin_ramoutar Posted April 24, 2016 Report Share Posted April 24, 2016 Hey guys, i've noticed over the last week that when i get close to objects and its detectable by the surround sensors, the image pops up on the screen and i start hearing the beeps but it does not show the indication of how close I am on my sides to an object. it only shows the front and rear indications. anyone else have this problem? Quote Link to comment Share on other sites More sharing options...
Nick Halstead Posted April 24, 2016 Report Share Posted April 24, 2016 have you looked at the gauge cluster to see if it says "object approaching from left" I know my sensors turn red or orange or something. I turn them off when going through a drive through though...it gets annoying Quote Link to comment Share on other sites More sharing options...
kevin_ramoutar Posted April 25, 2016 Author Report Share Posted April 25, 2016 have you looked at the gauge cluster to see if it says "object approaching from left" I know my sensors turn red or orange or something. I turn them off when going through a drive through though...it gets annoying the gauge cluster does show "object approaching from left" with multiple beeps and the blind spot indicator flashing but that's only in reverse for the cross traffic alert. do you think it has something to do with the MFT system itself? i was thinking about trying a master reset to see if it resolves the issue Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.