NWS Alpine

It's possible but sometimes it's not. There are quite a few parts to get it working. There is a sensor that ties into the rear suspension and there needs to be a control system. That might or might not be able to be programmed. Also ECE requires headlight sprayer/wipers along with the autolevel. Wish the DOT would do the same.

Not sure if the US versions have self leveling. On the headlights where the adjustment part screws in there is some text that says ECE motor. Once can only assume that there is a euro part that fits in the same spot for auto-leveling which I believe is required for HID lights in parts of Europe.

THe OEM bi-halogen are actually very nice projectors. The Phillips HIR2 bulb in then is actually by far the best halogen bulb to date. It has a lumen output that is similar to a slightly dimmed HID bulb (1-2 years old). There is the Catz Zeta system which boosts the HIR2 bulbs and they are really bright but i would worry about heating the bowls too much and the chrome flaking off. The stock projectors are very open so it might be ok. Also when I mod cars I like to keep an OEM look an always try to improve upon the stock version. Tinting the lights to me doesn't look good as it hides the awesome lights. It also kills the performance as you noticed. I really like to open the light up and black out the inside before considering touching the lens. These headlights are extremely hard to open even if you have opened many lights before. The permaseal is no joke and does not release with heat so we need to cut or physically break the seal with force. When I seal them back up I will need to use some silicone and some grey kioto butyl to seal them back up http://shop.lightwerkz.net/product_info.php?cPath=13&products_id=65. our headlights are fully sealed with gortex patches to let air pass but not moisture.

Wow now I feel worried. My dealer still has nothing on my order and this is the 3rd person who ordered weeks after me and cars are built. I wonder if there is something I ordered that is holding up my order? Congrats though!

I ordered mine 2 weeks before you and I still have nothing!! no VIN nothing. I'm so impatient too. Congrats.

I am hoping to get some info this week or next. Sales guy had no VIN info yesterday. Fortunately only Ford can strike apparently because of the government money given to the other american automakers.

Don't skimp on the amp. I have a JL HD900/5 waiting to power some components actively via the JBL MS-8 and a JL stealthbox. I really like these new class D amps like the HD series. Small and extremely clean power at any voltage. Much better than traditional amps.

Ford and the UAW are starting contract negotiations right now. They sent out strike info to employees incase they don't go well. So basically we can expect a strike soon. If they do I might have to cancel my order if it delays it more as I will not put up with this shit. Guess I deserve it for trying to buy American this time. http://www.blueovalforums.com/forums/index.php?/forum/11-ford-employee-forum/

Glad your cars are getting out before any potential strikes. i really hope mine gets moving. Still no VIN yet and ordered 8/26.

You need to get a whole new projector setup while doing a retrofit. Since you are looking at TRS I would recommend the FX-R projectors with the clear lens upgrade. Also get their morimoto 55w ballasts. I would not get a 6000K bulb though as it will not be that bright and the blue light doesn't travel as far. If you want a clean white light and the most lumens go with the OSRAM 66240 CBI 5000K bulb. Aftermarket bulbs tend to color shift too much and they often don't match the same color from bulb to bulb. Always use OEM bulbs wherever possible.

Is it water or is it coolant? Does it smell at all? I have seen faulty heater cores leaking and causing the carpets to be wet on the inside. Don't have my edge yet so not sure about this issue.

I don't think she had a choice. Getting caught street racing is serious. Lucky to still have the car to trade in. Insurance will be through the roof.

I use only Optimum no rinse and you can also use it as a quick detail. I only use it for bugs and bird droppings to get it off the paint quickly. A quick detailer should not have any wax in it. If it does then it's a spray wax. Quick detailer is just used to remove contaminants that are sitting on top of your wax/sealant layer. It will not affect the re-application of your waxes.

Welcome! You might want to post in this section as it's specific to your question http://www.fordedgeforum.com/index.php?/forum/50-alarms-keyless-entry-locks-%26-remote-start/ Also a tip for using google to search as sometimes the built in search isn't that great. Go to google.com and put in "site:fordedgeforum.com" without the quotes and then a space and your question like this. http://www.google.com/#sclient=psy-ab&hl=en&source=hp&q=site:fordedgeforum.com+remote+start+install&pbx=1&oq=site:fordedgeforum.com+remote+start+install&aq=f&aqi=&aql=&gs_sm=e&gs_upl=1279l12081l0l12367l45l43l1l0l0l2l1349l6189l17.23.5-1.0.1l43l0&bav=on.2,or.r_gc.r_pw.r_cp.,cf.osb&fp=43a2a4b3e26d172a&biw=1920&bih=994

Just over 4 weeks and still nothing. No VIN and no DORA. If I don't see anything next week I'm not going to be happy. Some people who ordered around my time got their VIN before 5 weeks. I want to get it built before FORD employees decide they want more money and strike. Good news is that it looks like the newer employees are voting positive.

The biggest reason in fuel economy and emissions. More so emissions.

The larger ecoboost engines are putting down some extremely impressive numbers on basic tunes before boosting any PSI. Some of the cars are getting around 100+hp to the wheels with tune and downpipes/cats and boosting psi. I was stating 50-60 to the crank and still believe it will be possible with a premium octane tune and messing with timing. Boost some PSI and they can easily get to 300hp at the crank.

OEMs tend to tune turbo engines for reliability so there is plenty of room. Look at what is done on the audi 1.8T and BMW 135/335/535 with juicebox/proceed devices. Custom tunes for various octane levels and minro bolt ons and they are increasing power way beyond stock numbers. 50-60hp at the crank is not much for a turbo car in stock form.

I bet there is 50-60 hp easily available with a custom tune for higher octane. The ecoboost has great potential for cheap power. Just wish it was available as the 3.5l in the edge sport trim. I wanted the ecoboost but the look of the sport was worth it for me.

Lighting is the same for the parts you mention. You can swap for factory HID but it will cost about $1200-1500. You can however use a 9012 bulb in the stock bi-halogen projectors but the OEM HIR2 bulb is really good for halogen bulbs. Stick with 4300-5000K for the best performance. 55W if you want brighter lights but really only needed if you live in a city as dark rural roads your eyes will see less into the distance with 55w. Also the 2012 manuals are posted online. Has all the info you need http://www.motorcraftservice.com/vdirs/SPubs/default.asp?pageid=oghome&gutsid=spubs_serv_all_new&TYPE=OWNERGUIDE&menuIndex1=17

I would highly advise against doing this! You may think your lights are brighter but fog lights with highbeams is worse. You lose a lot of your ability to see down the road. Your eyes adjust for the brighter light in the foreground. There is a reason why many engineers have spent countless hours designing projectors with foreground limiting shields. You want the light to be bright down the road and not in front of you.

I already made them write down not to install a front plate and not wash it. The front plate isn't on my order but I don't want some guy in the shop install an spare one laying around. All the cars on the lot have a front plate with the dealers advertising. No front plates in FL. I am hoping I don't need to do any paint compounding and just remove any oxidation and seal it. I might just do a quick polish since I am putting opti coat.

You can get nib MS-8s on some forums for ~$450. JBL transfers warranty to all owners assuming it was originally purchased from an authorised source. The MS-8 alone would really increase the stock system. Add in some time with some CLD tiles and some closed cell foam and there can be some great results.

I also have 55w ballasts and the epic OSRAM 66240 CBI 5K bulbs. These lights are going to destroy every OEM projector on the road. Especially with the clear lenses in them.

Just got back from vacation and opened one light. Permaseal needs to be banned! Anyways the rx350bx are going to fit fine. I just need to get some longer screws and I have an easy method to secure them to the oem bracket. These headlights are designed nicely for a retrofit. PLENTY of room and very east to retain stock adjustment. The projectors will be mounted in front of the bracket now since they sit about 1/2" further back than the stock ones. Don't want to lose any width since that is the main reason I went with these projectors.