CVCashmere

I just upgraded to the A10 map version and am selling my old version. It does not work on Sync 3, but will work on other Ford products using the correct version of My Touch. Note: the A11 version just came out but it is too pricey for me. I can take PayPal and send it in a double-envelope and case for free. Thanks CVCashmere

New Lower price: $55. It will not fit The 2019 Edge. I am a little concerned about shipping it-if I roll it up, it maybe develop a crease. But if not in the Mid-Atlantic area (near Philly), reach out to me and I can try to roll it to see if it would be creased. Shipping extra using ground shipment. thanks CVCashmere

LOCAL PICK-UP IN PHILADELPHIA AREA ONLY! Price reduced! This is a New hood insulation pad for a 2015-2018 Ford Edge (all models). I bought this thinking it would fit a 2019 Edge (as they did not provide one). My mistake...but I cannot return it as I lost 1 of the 15 clips while trying to fit it. Local Philly dealers want around $130 for it, but I can sell this one for much less as I cannot use it. So...it fits all 2015-2018 Edge models. If yours has been damaged by rodents, oil, etc. this is perfect for you. You can even use the existing clips to replace the missing one. Thanks for looking! CVCashmere

The stitching is fine. the fit can be a little tighter by adjusting the straps. We left it loose. They are designed to break free at the side air bag. In fact, there is a tag showing where the air bag is. Can't beat the price if they last 2-3 years. CVCashmere

Hi All We went to Costco and purchased new seat covers for our 2019 ST. We were concerned the alacantara fabric would stain or fade over time, so we installed these covers today. They are $25 but with a coupon, the price drops by $5. Since we want to keep our Edge for awhile, we estimate we may get 2-3 years out of these covers before we discard them. They seem comfortable so far, and you still do not slide around. see the pictures for details. Thanks CVCashmere

Here is a picture of the part number.

I have just installed the front Ford mud flaps on our 2019 Ford ST. They are made in Germany and come with excellent instructions. Follow them carefully, and they did work on our 2019 Edge.

This is a great answer! Thanks from the update about the clips. Now I can order one online and know that the clips are included. CVCashmere

Hello Gadgetjq and All: I had a logical reason to ask Engr146 the question. He did state the facts as you mentioned...but the dealer may have given him one price for the clips and the pad, and he may/may not have been aware of it. The online dealers show that pad but NOT the clips. That is why I wanted to hear if he paid extra for the clips, so that when I order my pad, I do not pay twice for them. BTW...the price at Levittown Ford is significantly cheaper than the price some are paying at the dealer. That's why I wanted to compare price with equal content. The pad is on my list after the luggage cover, which Levittown Ford offers a good price on. Thanks CVCashmere

thanks for the info! when I look at the hood insulation, they do not state that the clips come with automatically. Did you have to pay extra for the clips, or were they in the box when the insulation came? I am thinking about ordering one, and do not want to pay twice for clips. thanks CVCashmere

The horns appear similar to the B horns. They are marked with a H and a L. They seem similar in volume to my Mustang horns and good for everyday use, CVCashmere Thanks to the great video in the first posting, I was able to replace my single horn on the ST with dual horns. It only took 3 times as long as anyone else cause I really suck at being a mechanic! Follow the video that started this thread and you will be successful. The original poster purchased the "Level 2" horns for about $18. FA1Z-13832-B. They Fiamm and made in the USA. I saw a listing for a "Level 3" horn for $28. That part number is FA1Z-13832-A. They are Fiamm and made in China. I did sterilize them to kill off the Corona virus . (just kidding). Are they louder than the Level 2 horn? I don't know. They are similar in size and appearance to the cheaper horns. BTW...I have enclosed the actual Ford procedure for removing the headlights. They were a help. There is a catch underneath you free by pulling the lights forward. I did grease the catch so that next time I change a bulb, it releases easier. Thanks Scan_0008.pdfScan_0008.pdf CVCashmere

Thanks to the great video in the first posting, I was able to replace my single horn on the ST with dual horns. It only took 3 times as long as anyone else cause I really suck at being a mechanic! Follow the video that started this thread and you will be successful. The original poster purchased the "Level 2" horns for about $18. FA1Z-13832-B. They Fiamm and made in the USA. I saw a listing for a "Level 3" horn for $28. That part number is FA1Z-13832-A. They are Fiamm and made in China. I did sterilize them to kill off the Corona virus . (just kidding). Are they louder than the Level 2 horn? I don't know. They are similar in size and appearance to the cheaper horns. BTW...I have enclosed the actual Ford procedure for removing the headlights. They were a help. There is a catch underneath you free by pulling the lights forward. I did grease the catch so that next time I change a bulb, it releases easier. Thanks Scan_0008.pdfScan_0008.pdf CVCashmere

Update: Since I have to use a front plate and the factory bracket was already mounted on my ST, I bought a black metal frame to cover the top front of the bracket where you slip the plate under to hold it (you use 2 screws on the bottom). Here it looks better as the bracket and cover frame blend together to hide the edges of the license plate. I have enclosed the brand i bought from Advance Auto. Thanks CVCashmere Scan_0014.pdf

Great looking car! Welcome! CVCashmere

Welcome! CVCashmere

Welcome! I live just outside of Philly in South Jersey! Stay in touch! CVCashmere

So...was it worth it? Did it cut down engine noise or provide a quieter interior? Was it easy to install?? Any other advantages to spend for it? Thanks CVCashmere

Since I have the Ford front license plate bracket, has anyone mounted a frame over the license plate and bracket. Please post pictures if you have them. Thanks CVCashmere

Thanks for the warm welcome! I have learned a lot from modding my Mustang and now, interested in learning about improvements to the ST. The horn upgrade was a great post! CVCAshmere

So...here is my first question for those who have made the switch: previous users have successfully bought the "level 2" horn w/part #FA1Z-13832-B, which appears to be a "Level 2" horn for about $18. There is a "FA1Z-13832-A" "Level 3" horn for about $28. What is the difference? is the Level 3 horn louder? Both fit the 2019 Edge. thanks CVCashmere

Picked up my Performance Blue ST 2 weeks ago! No pictures yet, but I have one somewhere. Leftover pricing but had to drive over an hour to pick it up. Blue was hard to find in our suburban area. Just breaking it in. I have several mods I will be doing as my Mustang is now 95% complete. My first posting will be about the horns. Thanks CVCashmere