Twister Posted October 6, 2012 Report Share Posted October 6, 2012 Have a bulb out in drivers side spotlight. Does anyone have the steps to replace? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
JOEHIO Posted October 6, 2012 Report Share Posted October 6, 2012 Drivers side spotlight. do you mean foglight, puddle lamp? Check your owners manual. Quote Link to comment Share on other sites More sharing options...
Twister Posted October 6, 2012 Author Report Share Posted October 6, 2012 Drivers side spotlight. do you mean foglight, puddle lamp? Check your owners manual. Sorry, it's the foglight. Quote Link to comment Share on other sites More sharing options...
JOEHIO Posted October 6, 2012 Report Share Posted October 6, 2012 Check with your owners manual, there should be a section on bulb replacement. Not certain, but the assembly probably pulls out from the backside, you will have to get to it from behind the bumper, then just replace the bulb. Joe Quote Link to comment Share on other sites More sharing options...
ablb Posted October 7, 2012 Report Share Posted October 7, 2012 I copied this from our 08 MKX owners manual. The bulb is an H11. I down loaded the PDF at. https://owner.ford.c.../OwnerGuidePage Replacing fog lamp bulbs 1. Make sure the fog lamp switch is in the OFF position. 2. From underneath the vehicle, remove the splash shield and rotate the harness/bulb assembly counterclockwise, to remove from the fog lamp. 3. Carefully disconnect the bulb from the harness assembly via the two snap clips. Install the new bulb in reverse order. ab Quote Link to comment Share on other sites More sharing options...
Twister Posted October 7, 2012 Author Report Share Posted October 7, 2012 I copied this from our 08 MKX owners manual. The bulb is an H11. I down loaded the PDF at. https://owner.ford.c.../OwnerGuidePage Replacing fog lamp bulbs 1. Make sure the fog lamp switch is in the OFF position. 2. From underneath the vehicle, remove the splash shield and rotate the harness/bulb assembly counterclockwise, to remove from the fog lamp. 3. Carefully disconnect the bulb from the harness assembly via the two snap clips. Install the new bulb in reverse order. ab Removing the splash shield is the pits. Looks like that's the only way. Thanks all. Quote Link to comment Share on other sites More sharing options...
JOEHIO Posted October 7, 2012 Report Share Posted October 7, 2012 Whadda ya gonna do ! Quote Link to comment Share on other sites More sharing options...
Twister Posted October 7, 2012 Author Report Share Posted October 7, 2012 Whadda ya gonna do ! Done! Remova da plastic thingy....take out...put in....shove thingy back. Now has da light. Quote Link to comment Share on other sites More sharing options...
JOEHIO Posted October 7, 2012 Report Share Posted October 7, 2012 Glad that you got your thingy removed, and your bulb replaced. Now you hae some good light on the subject ! :hysterical2: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.