Parabellum222 Posted January 8, 2020 Report Share Posted January 8, 2020 My ABS kicks in when driving on flat, dry pavement. This has been happening more and more lately. No light comes on and no fault codes are present. The wheel speed sensors are generally all consistent with each other so I do not think it's one of them or a tone ring, though I am no expert. Attached is some ABS log data from my OBDlink MX+ at half second intervals. Some sensors do not seem to output at that rate but you can get the general picture. This was a 5 minute, 2 mile drive with two brief instances where the ABS was active (highlighted in the file). I would appreciate it if someone can take a look and see if anything stands out. The vehicle is a 2008 Edge AWD Limited with 188K. Thanks in advance! CSVLog_20200108_160846.csv Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.