Stallme Posted February 15 Report Share Posted February 15 My 2010 limited (no towing package) blew a head gasket, I ordered a replacement motor. The replacement motor matched the vin code, however it is a motor with the engine oil cooler (tow package motor I am assuming). I am having difficulty figuring out where the oil cooling lines run, where does the other end connect. Would bypassing the cooler be the best route. All answers are greatly appreciated. 1 Quote Link to comment Share on other sites More sharing options...
NzP Posted April 1 Report Share Posted April 1 what have u found? Quote Link to comment Share on other sites More sharing options...
enigma-2 Posted April 12 Report Share Posted April 12 Aren't you talking about the transmission cooler? Quote Link to comment Share on other sites More sharing options...
The-Gingineer Posted May 1 Report Share Posted May 1 On 4/11/2025 at 10:30 PM, enigma-2 said: Aren't you talking about the transmission cooler? @enigma-2, Edge's with the tow package have an engine oil cooler next to the oil filter. I realize this is a late post, but I would bypass the coolant hookups to the oil cooler. If you want to run the oil cooler, you need upper and lower radiator hoses, a different fan shroud, and I think 2 more hoses that hook to the cooler. I'm in the process of going the other way, my original engine had the oil cooler (tow package), and my replacement engine doesn't have it. I don't tow with the Edge, so I don't need it. Also the tow package Edge's havea thicker radiator. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.