Jump to content

Interior Lights Never Come on


Recommended Posts

I inherited my brothers 2016 Ford Edge, 43K miles.  Interior lights don't come on when door is opened.  I found the disable feature from reading the manual.  I changed that without success.  Pressing the individual control buttons near the rear view mirror do nothing.  I see there is a fuse #1 for "demand lighting."  If blown, that would probably explain everything.  Manual told me where the cabin fuse panel is located  -- i.e., to the left of the streering column under the dash.  I removed the small pull-out convenience tray for better visibility.  I can just barely see the fuse panel way back in there.  No way could I get my hand in there, not even close.  I don't see how anyone could reach it from that direction.  As far as I know, you need to remove the fuse to see if it is blown.

 

My questions:

1) Is there a better way for an adult hand to access the fuse panel?

2) Is there an easily accessible point "downstream" from the fuse where I could check for battery voltage?

 

Note:  I am new to my 2016 Edge and a first time user of this owners forum.  I hope I have posted my problem in the right place. 

 

Paul in Texas

Link to comment
Share on other sites

Here is a picture of the cabin fuse panel of my 2016 Ford Edge.  It is taken from the opening in the dash after removing the small pullout tray.  In the lower left of the picture is a multi-pin connector.  Does anyone know what this connector is for?  Maybe it is not in use because I don't have some optional electrical accessory.  Could it be the connector for the interior lighting that somehow got disconnected?  But from where?

 

Along the right side in the dark area is the barely visible row of fuses that are essentially out of reach.

 

Thanks.

Paul in Texas

 

 

IMG_3012.jpg

Link to comment
Share on other sites

Did you try all doors to see if the light comes on from any of them other than the drivers? If the door is open does the dash say the [which door] door is open?

 

The switch is part of the latch and fails often, and is bypassed frequently so that it doesn't always say it is ajar or not allow it to be locked.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...