audiomatic Posted January 16, 2011 Report Share Posted January 16, 2011 I need to remove the center console (or at least the storage compartment) on my new 2011 edge. Can anyone help give some direction. Thanks Quote Link to comment Share on other sites More sharing options...
Ruissimo Posted January 18, 2011 Report Share Posted January 18, 2011 If you don't mind me asking... why? Quote Link to comment Share on other sites More sharing options...
audiomatic Posted January 19, 2011 Author Report Share Posted January 19, 2011 If you don't mind me asking... why? I am trying to install seat heaters in the vehicle and need to get inside the console to run the wires and install the switches. I have done this on a few vehicles, but this center console is a little bit more difficult to remove than an escape or toyota Quote Link to comment Share on other sites More sharing options...
wilsons66604 Posted January 19, 2011 Report Share Posted January 19, 2011 I am trying to install seat heaters in the vehicle and need to get inside the console to run the wires and install the switches. I have done this on a few vehicles, but this center console is a little bit more difficult to remove than an escape or toyota Here are instructions for installing ambient lighting. They may help with tearing your console apart. Install Ambient Lighting.pdf Quote Link to comment Share on other sites More sharing options...
audiomatic Posted January 22, 2011 Author Report Share Posted January 22, 2011 Thank Wilson, I did it today and that helped a lot. I appreciate the help! Now my seats are heated! Here are instructions for installing ambient lighting. They may help with tearing your console apart. Quote Link to comment Share on other sites More sharing options...
samskudd Posted January 24, 2011 Report Share Posted January 24, 2011 Thank Wilson, I did it today and that helped a lot. I appreciate the help! Now my seats are heated! What did you buy to do that? Where is the switch? Quote Link to comment Share on other sites More sharing options...
audiomatic Posted February 5, 2011 Author Report Share Posted February 5, 2011 I bought a set of Peak Universal 11" x 19" Carbon Fiber Dual Temp Seat Heater kits online. I installed the switches on the top of the center console just behind the shifter. I drilled the holes using a forstner bit for perfect circles. I can take photos if interested....... It took about 4 hours to install both front seats. They work great and get hot faster than my other vehicles stock units. What did you buy to do that? Where is the switch? Quote Link to comment Share on other sites More sharing options...
07CRUSH Posted February 6, 2011 Report Share Posted February 6, 2011 I bought a set of Peak Universal 11" x 19" Carbon Fiber Dual Temp Seat Heater kits online. I installed the switches on the top of the center console just behind the shifter. I drilled the holes using a forstner bit for perfect circles. I can take photos if interested....... It took about 4 hours to install both front seats. They work great and get hot faster than my other vehicles stock units. Can you post some pics. Thanks Quote Link to comment Share on other sites More sharing options...
Mighty Noid Posted October 27, 2011 Report Share Posted October 27, 2011 Thank you for the info... It helped me out greatly yesterday :happy feet: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.