Jump to content

Custom Search

Photo
- - - - -

Rear Window Glass:the dry adhesive tape dropped out


  • Please log in to reply
8 replies to this topic

#1 OFFLINE   EDST777

EDST777

    Ford Edge Member

  • Edge Member
  • 331 posts
  • Region:Decline
  • Location:USSR (Euroasian economic union)
  • Edge's Year:2008

Posted 11 June 2018 - 10:40 PM

Hello, the problem was found. The adhesive tape cracked and drops out how it is possible to insert a new adhesive tape or what else options are possible?
Thanks.

Attached Files


Edited by EDST777, 11 June 2018 - 11:02 PM.








Lose this advertisement by becoming a member. Click here to create a free account.


#2 OFFLINE   WWWPerfA_ZN0W

WWWPerfA_ZN0W

    Ford Edge Legal Resident

  • Edge Platinum Member
  • 9,217 posts
  • Region:U.S. Northeast
  • Location:Maryland
  • Edge's Year:Decline

Posted 12 June 2018 - 07:05 AM

Happened to mine a LONG time ago LOL.  The best way to fix it is to remove the spoiler and redo the weatherstrip on BOTH sides of the spoiler.  The trick is to NOT put pressure on the glass while you remove/install the spoiler.  There might even be a TSB or two on this, I know there is for the windshield where it meets the cowl, have to check.


  • EDST777 and omar302 like this

#3 OFFLINE   EDST777

EDST777

    Ford Edge Member

  • Edge Member
  • 331 posts
  • Region:Decline
  • Location:USSR (Euroasian economic union)
  • Edge's Year:2008

Posted 12 June 2018 - 08:28 AM

Thanks. I am very glad to meet again here again)! It is how difficult to remove a spoiler, can be to eat the name of the procedure? thanks.



#4 OFFLINE   WWWPerfA_ZN0W

WWWPerfA_ZN0W

    Ford Edge Legal Resident

  • Edge Platinum Member
  • 9,217 posts
  • Region:U.S. Northeast
  • Location:Maryland
  • Edge's Year:Decline

Posted 12 June 2018 - 08:50 AM

The steps are quite simple, it is just that care has to be taken when lifting the spoiler off the glass and reinstalling it.  Definitely a 2+ person job.

 

This procedure is for a 2014, but very similar for your 2008.

Spoiler Item Part Number Description 1 W651016-S Spoiler nut covers (2 required) 2 W621926-S Spoiler nuts (5 required) 3 010807 Spoiler 4 — Spoiler retainers (part of 010807) 5 021A46 Spoiler gasket
  1. Remove the liftgate trim panel. For additional information, refer to Section 501-05 .
  1. Disconnect the electrical connector and the rear windshield washer hose from the rear spoiler.
  2. Remove the 5 rear spoiler nuts.
    • Remove the 2 nut covers.
    • Remove the 5 nuts.
    • To install, tighten to 6 Nm (53 lb-in).
  3. Place a piece of tape on the liftgate to protect the paint.
  4. NOTE: There are 4 pin-type retainers on the bottom of the spoiler. When removing the spoiler it is difficult to access the retainers to release them from the liftgate. It may be necessary to pry upward on the rear spoiler to release it from the retainers. Do not pry on the window.

    Remove the rear spoiler.
    • Place a pry bar between the liftgate and the spoiler.
  5. To install, reverse the removal procedure.

  • EDST777 likes this

#5 OFFLINE   EDST777

EDST777

    Ford Edge Member

  • Edge Member
  • 331 posts
  • Region:Decline
  • Location:USSR (Euroasian economic union)
  • Edge's Year:2008

Posted 12 June 2018 - 10:45 AM

Thanks. What function of an adhesive tape? To eliminate damages of glass from jolting when driving and a tinkling sound? I can use any bilateral adhesive tape?



#6 OFFLINE   WWWPerfA_ZN0W

WWWPerfA_ZN0W

    Ford Edge Legal Resident

  • Edge Platinum Member
  • 9,217 posts
  • Region:U.S. Northeast
  • Location:Maryland
  • Edge's Year:Decline

Posted 12 June 2018 - 03:04 PM

IDK for sure.  But your statement seems a valid one to me.  Keeping a cushioned separation is important to the integrity of the glass.  I am not sure exactly what kind of tape it is, but it should be automotive grade at least.  This way it will last, not get moldy/mildewed, etc.  All those things you look for products for use in the outdoors.


  • EDST777 likes this

#7 OFFLINE   EDST777

EDST777

    Ford Edge Member

  • Edge Member
  • 331 posts
  • Region:Decline
  • Location:USSR (Euroasian economic union)
  • Edge's Year:2008

Posted 12 June 2018 - 08:27 PM

Thanks, as always you have provided excellent and useful information.


  • WWWPerfA_ZN0W likes this

#8 OFFLINE   enigma-2

enigma-2

    Ford Edge Fanatic

  • Edge Member
  • 3,332 posts
  • Region:U.S. Great Lakes
  • Location:Indiana
  • Edge's Year:2009

Posted 13 June 2018 - 03:03 PM

It looks more like a gasket used to prevent water from migrating under the front of the spoiler.
 
Attached File  Spoiler overview.jpg   109.48KB   0 downloads
 
Item        Part Number                     Description  
1            W651016-S               Spoiler nut covers (2 required)  
2            W621926-S               Spoiler nuts (5 required)  
3            010807                      Spoiler  
4                                         Spoiler retainers (part of 010807)  
5            021A46                     Spoiler gasket  
 

1. Remove the liftgate trim panel. For additional information, refer to Section 501-05 . 
2. Disconnect the electrical connector and the rear windshield washer hose from the rear spoiler. 
Attached File  Spoiler 2.jpg   23.74KB   0 downloads
 
3. Remove the 5 rear spoiler nuts. 
Attached File  Spoiler 3.jpg   32.55KB   0 downloads
 

° Remove the 2 nut covers. 
° Remove the 5 nuts. 
° To install, tighten to 6 Nm (53 lb-in). 
 
4. Place a piece of tape on the liftgate to protect the paint. 
Attached File  Spoiler 4.jpg   26.02KB   0 downloads
 

5. NOTE: There are 4 pin-type retainers on the bottom of the spoiler. When removing the spoiler it is difficult to access the retainers to release them from the liftgate. It may be necessary to pry upward on the rear spoiler to release it from the retainers. Do not pry on the window. 
° Remove the rear spoiler. 
      ° Place a pry bar between the liftgate and the spoiler. 
Attached File  Spoiler 5.jpg   20.47KB   0 downloads
 
6. To install, reverse the removal procedure. 
 
edit: this was for a 2009 edge, think it's the same.
 

Edited by enigma-2, 13 June 2018 - 05:54 PM.

  • EDST777 and WWWPerfA_ZN0W like this

#9 OFFLINE   EDST777

EDST777

    Ford Edge Member

  • Edge Member
  • 331 posts
  • Region:Decline
  • Location:USSR (Euroasian economic union)
  • Edge's Year:2008

Posted 13 June 2018 - 08:26 PM

Thanks, the procedure it is detailed!


  • WWWPerfA_ZN0W likes this




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users