snmjim

When doing a brake job, wether big or small we always recommend a full fluid flush, can't go wrong there...???

Note: brake fluid is one of the highest moisture absorbing fluids which in turn leads to caliper, wheel cylinder & master Cyl corrosion and/or seizing.

22 hours ago, rod.charlie said:

Could someone please help. I need to replace my front brake pads on my 2016 Ford Edge Sport. I need the full procedure of doing the job above. Thanks.

Get an electronic copy of the factory service manual, it's awesome, best I've ever seen!

33 minutes ago, TheWall0211 said:

Thank you.  Did you use a Corsa kit or just the tips?  Did you use Y tips or offset tips?  Did you use a 2.5” inlet or something else?  Where did you order from?

 

I’m having a hard time figure my out what I need and where to get it - so sorry for all the questions.

Just the tips welded directly to the stock muffler. Our exhaust Sys is 2.5 from the stage 5 Turbos back to just after the rear Diff directly to the cutouts then after the cutouts its the stock muffler, so that worked fine.

Don't know where they came from, our fabricator ordered them. Google Corsa quad tip then select the shopping tab.

10 hours ago, TheWall0211 said:

This is a great thread.

 

any recommendations on quad exhaust tips?

 

We used Corsa quads

3 hours ago, onyxbfly said:

 

My information comes directly from Colin and Jim. If you take a gander at the Ultimate Parts thread you will see that it hasn't been updated in quite some time. @Special_K or @snmjim would have to edit it, or have a mod do it.

 

Or if someone is so inclined to check to see if they can order one from RamFab.

Ramfab will point you in the right direction as to who he sold the rights to...?

On 3/22/2022 at 10:19 PM, MSCOSC said:

How much you want for the black exhaust bezels? Any photos? 

 

Make an offer

We sure did!

In the first 4 hrs on the market 6 people showed interest and 4 people came to see it. In 10 hrs it sold.

No experience hollowing downpipes because we wanted 2.5 pipe all the way back.

However, hollowing out the stock downpipes has potential. 

FYI

We have a set in great condition for sale.

Pics available upon request.

Misc stock 2016 Ford Edge Sport Parts (slightly used)

- Air filter box with new filter

- HPFP

- Fuel injector manifolds

- HPFP to injector manifold fuel lines

- All Turbo oil & coolant lines

- Intake

- Throttle body

- Valve cover Oil fill plug

- Front wheel small splash flap

- Turbo heat shields 

- Downpipes 

- Pair of rebuilt heads 

PM us on Instagram if interested.

8 hours ago, bryantgbell said:

Thanks Jim! 

 

And if anyone has a stock resonator back exhaust, I'm looking to get my hands on one. I have MRP setup now with quad tips, and wouldn't mind swapping plus a couple $$. Located in Tampa. 

 

Time to go custom like Jim! 

 

 

Recommend running 2.5 pipe straight off your DPs using V-Band clamps straight N2 the stock muffler with no resonator along with BT cutouts just B4 the muffler. U can setup the BT cutouts 2 work from 2 of the 3 garage door buttons on your visor, one button 2 open and one 2 close...?

3 hours ago, bryantgbell said:

Thanks Jim! 

 

And if anyone has a stock resonator back exhaust, I'm looking to get my hands on one. I have MRP setup now with quad tips, and wouldn't mind swapping plus a couple $$. Located in Tampa. 

 

Time to go custom like Jim! 

 

 

R U reverting back 2 stock exhaust Sys?

On 2/18/2022 at 10:14 AM, bryantgbell said:

I'm not sure if this is the right spot to post this, if not I apologize: 

 

I have a set of stock 2.7L Turbos off of my 2017 Edge if anyone is interested in them! 

 

Hey there Bryan,

Glad to see your build is evolving nicely. 

In reference to your Turbos...please reference our Insta PM to you...?

On 2/4/2022 at 12:15 PM, Cookiemonster117 said:

Are these still available. How nightmareish was the install? Looking for Catless

 

If our fully bolted 584 whp 2016 Edge Sport doesn't sell as is in the next 1-2 months we'll be returning the car to stock and selling all the performance parts which will include catless downpipes, maxed out Turbos by CRP, pinned rear coupler and much more.

Check us out on Instagram at fastest_edge 

On 1/12/2022 at 5:05 PM, Xtra said:

I am sorry to see you moving on from the Edge platform.  When you first started this journey there were few if any performance parts available for the Edge. You have pushed it to the max and given the Edge community a plethora of bolt on performance parts to work with.  Your legacy will live on as a leader of the Edge performance community. Thank you both snmjim and Special_K  for all you have contributed. You guys rocked it with a world record that will stand for decades !

Thnx best coast Brother for your kind words of appreciation & recognition.

Just want to reassure everyone that we're not gone and can be reached via the forums and Instagram PM systems.

Stay tuned on our projects progress via Instagram @ fastest_edge

Across the ground or falling from the sky, everything at terminal velocity & beyond???

6 hours ago, WWWPerfA_ZN0W said:

argh! we are not ready yet to buy

 

i have seen this Edge in person, and it is everything that has been posted about, in words, pictures, and videos.

.

Thank You Manu for your support!

On 9/16/2021 at 7:20 PM, Markham12 said:

That is an awesome build. I would buy a vehicle with those numbers for sure. That is approaching trackhawk numbers, which is my dream suv. Someday perhaps. AWD vehicles are fun.

Well here's your lucky opportunity, it just went on the market, make us an offer you just might be surprised!

it's fully bolted with a stock 3.0 TT eco boost and everything in the car is in pristine condition and a fully functional reliable daily driver...???



584 whp & 600+ lbs of AWD torque and continues to get 29 +/- mpg Hwy cruising at 65-70 mph...???

52 minutes ago, Perblue said:

 

Love what you've done but this is clearly a world issue not just forum. Everything I read I didn't take how you did and seems to be overly defensive, hell for some reason you guys blocked me on facebook despite me not ever saying anything to you, can see clearly people chatting and replying to you but I see nothing but their replies. People need to chill and find their sense of heehaw and quit taking things so serious. There will be critics no matter what you do, do what you do because you enjoy it, not for anything else, if people didn't do this we would have the insanely modified cars like civics, golfs and such. Hell most people around me and shops around here think I'm dumb for modifying my edge, but I do it anyways because I enjoy having a modified vehicle.

Hey there Perblue,

Sorry that you were blocked without apparent cause.

I'll check into that.

Please provide month & year it happened, what site/forum, your site name and what you suspect may have prompted it and I'll check with the team to identify if it was justified.

Jimbo

5 hours ago, WWWPerfA_ZN0W said:

@snmjim the conversation gets out of whack now and then. we definitely do not want you to mothball Edge stuff in any way, it is amazing what you and your son have achieved in a relatively short period of time.  there is much you have contributed also outside of this forum, that many may not be aware of.  stick with us.

Hey there Manu & Happy New Year!

We appreciate your support and will continue to be available via PM for you and people like you but once we get this time trial completed with the pinned rear coupler we're selling & moving on.

Recommendation: there should be better oversight on this site and many others where people like ourselves don't have to tolerate the BS especially when we give so much with so little in return. 

We really appreciate you Manu???

7 hours ago, TT Steve said:

Who doesn't appreciate your efforts? When the ST came into play, things seem to slow down a bit of course some of that is Facebooks fault. I hate that platform. The ST community is not quite as large as the Sport crowd even though we are hitting 3 years of production now but that will be ending and I am thinking along with any aftermarket support too. Better get what you can now while you can, right? I think everything you all did was cool as hell especially for a crossover platform. And to share it with all the other folks is great, you didn't have to either. I appreciate everything you and others have done on this site and I just barely got into this 4 months ago. I am curious of the next venture and will keep my eyes open for that.

 

Steve

Hey there Steve,

We appreciate your show of appreciation however, over the years we have noticed a progressive increase of negative and antagonistic responses on this site and many others which has far out weighed the show of appreciation and respect.

When you're 65 and my Son is 30 and doing this as a labor of love the only thing fueling one's drive is appreciation & respect these antagonistic responses totally demotivativates.

If you want to stay in touch follow us on Instagram at fastest_edge which will eventually become fastest_??? (which will be the model name next project car). Here's a clue of the next project car...it will have the B58 motor...?

Thank you again to those that expressed their appreciation and for those who still appreciate & respect our efforts feel free to PM us here or at our Instagram account.

Wishing all of you who supported us the best with your projects and we'll continue to be available via PM for those that value our efforts!

NOTE: The FASTEST Edge is on the market now, make us an offer you just might be surprised, BTW, it's fully bolted with a stock 3.0 TT eco boost and everything in the car is in pristine condition and a fully functional reliable daily driver...???

584 whp & 600+ lbs of AWD torque and continues to get 29 +/- mpg Hwy cruising at 65-70 mph...???

1 hour ago, handfiler said:

Is "JC Performance Development " a secret club? A web search turns up zilch.

No, you will not find JC Performance Development on the internet because it's a private Father/Son engineering team with a network of fabrication & Aftermarket resources that has made it possible for us to provide listings of available Aftermarket parts. We do this as a hobby for a very few select project car models.

The Father (snmjim) & Son (Special_K) work as engineers for the Dept of Homeland Security by day and we use our skills & resources to develop lists like this one for unique platforms for the past 10 years.

It's beginning to appear that our efforts are no longer appreciated and/or respected here therefore the timing is perfect for moving on to our next project.

Check us out from the sidelines on Instagram: "fastest_edge" which will soon morph into the next project and become "fastest_???"

Fun while it was appreciated!

30 minutes ago, Cerberus said:

Cool thanks.

Not to go too far off topic but you seem to referring to yourself (singular?) As "we"..

Or do multiple people use your account?

Or do you speak on behalf of a group?

Very confusing. 

 

And sorry for the snark. Your perceived antagonistic reply to my expressed interest in the catch can install seemed to warrant but I apparently misread your intention. 

 

We = JC Performance Development along with the aftermarket parts development companies and fabricators that worked directly with us to develope 90%+ of the aftermarket parts for the 2016-2019 Edge Sport & ST.

However, we don't see the value added for clarifying who "WE" are.

We don't understand how starting a statement offering help off with "Sorry" can be perceived as being antagonistic???

Instagram: fastest_edge

1 hour ago, Cerberus said:

And your problem is?

(That's a direct question)

We're not the one's with the problem, we're the ones trying to identify if you or SC_ST need help with something since we're the one's that worked directly with Vinney (JLT Owner) to develope this catch can Sys for the 2.7 TT eco boost.

But it appears from your snarky response that we totally misunderstood and you got this.

Wish you the best?

4 hours ago, Cerberus said:

Hoping for an update on this whenever you get around to it..

I've been wanting to install a catch can but just not gotten around to it yet

Sorry but you have yet to pose a direct question???

23 hours ago, Cookiemonster117 said:

Does anyone know the diameter size and material/type of hose we are supposed to use for this?

It's a one-for-one replace, fits the stock Intercooler coupler & throttle body tube.

On 6/2/2020 at 9:48 PM, Gmandude said:

I know I am a little late to the game but an engineer told someone that it’s a air dynamic affect. When you close the right side it creates a high pressure and the forces more air to the left side. Most cars are starting to use this in all brands.

It's to accommodate the automatic distance reader for the cruise control. To cut costs Ford designed just 2 grills, one to accommodate the models with block warmers and all others get this one.

On 9/4/2021 at 10:51 AM, Ssprice78 said:

Is the pipe still available?

Sorry, sold