Bryce

Ya, but the lower profile tires on the 20" rims cost more anyhow... go to tirerack.com and price them... Supply and demand thing.

Could be the same way that RDS info is displayed on a non-NAV radio

I don't watch the show, but heard that there was an Edge in one of the videos... it made a great Edge commercial. Edge - Zero2Sixty - Ont the Lot <<<--- Click here to see it Bryce

A bit of RTFM and I cam up with Page 206 from this link --->>> Online Edge Owners Manual 2000lbs max for a Class 1 hitch with 200lbs tongue weight max 3500lbs max for a Class 2 hitch with 3500lbs tongue weight max. With that said, 8400lbs is the GCWR... that means that your Edge, your trailer, your passengers and anything in the vehicle/trailer combined should not be over 8400lbs. Bryce

I got a full set of Husky Liners for our edge. Check out my most about them here.... http://www.fordedgeforum.com/index.php?sho...08&hl=husky I also have a set of the Ford OEM front and rear seat rubber winter floor mats. Never used, but the box has been opened... I'm open to offers. Bryce

Ours caught about a cup of milk that came out of a bottle that got squished with all the other junk from the store. Just wipe it up rather than cleaning the carpet so the car doesn't smell like rotten milk. Bryce

Polarized glasses and looking through the windshield and not at it does the trick for me. I notice the silver trim around the useless little pocket at the top of the center stack sometimes, but it's not enough to bother me. I get similar reflection (that's what it is, not glare, by the way) from the black and tan dash on my F-250 too. Like Good Hands, I['m not into the look of a dash mat either. Bryce

We had an issue with our BAMR at first, but the dealer fixed it under warranty. It would make a noise when closing and sometimes not close all the way the first time (it would get to about an inch of closing and then back up like it thought something was stuck in it.. like an arm/hand). They adjusted the track on the passenger side and all is well now. As for noise, it's actually nice and quiet inside ours. I too drove an Edge without the BAMR while ours was getting the BAMR adjusted, and it drove the same and was just as quite. Can't help on the lease.. we put far to many miles on vehicles to do a lease. Bryce

I'll for sure disagree with those statements... 1) Our Edge does not have the SatRad antenna on the spoiler (we don't have Sirius... I'm an XM kinda guy) 2) At least on my Garmin 60CSx, I'm picking up 9 Satelites (out of 12 possible channels) in a windowless room in my basement right now. Bryce

I have too likely suspects... 1) the big lump between the windshield and the rear view mirror 2) the small pyramid front and center on the dash is it one of these or somewhere else? if it's not one of these (or one is and not the other) what are these 2? Bryce

I don't know about the wiring, but does your headlight switch have the set up for it? to turn then on, you have to pull out the knob on the headlight switch. A headlight switch could run into a good amount of money if it's not the one for fog lights. Just the knob (not the entire switch) for my F-250 when it broke cost me $25.00 Bryce

From my earlier post in this thread... Part #7A1Z-17B807-AA for the MKX and Part #7T4Z-17B807-AA for the Edge. And the first time a can of corn falls out of a grocery sack unloading your vehicle and it takes a nice chip of paint out you'll wish you had it installed. Bryce

Bug and Tar Remover will usually do the trick.. then follow up with some soap and water. We've got commercial grad stuff in our sign shop, but I wouldn't spend the money for "do it yourselfers". Bryce

the problem with the paper labels on the CDs is that they get HOT in teh player... so hot that the adheasive will let loose and no matter how well that you put it on, it's going to come loose and jam. I've had no problems playing homemade CDs without labels with other Ford radios (Visteon Brand) in the past and no problems with our Pioneer made unit in our Edge.

No, you just have to get the dual-zone automatic climate control... it's part of that. From the Owners Manual Page 72 On-Line Owners Manual

I guess my reply is late, but yes, that's the black liners with the Charcoal interior. Bryce

What's the volume of your ipod set at? try turning it up more. Not all the way as you'll be "over driving' the amp in the radio and get distortion. Bryce

... and this'll be all of 'em :happy feet: and it's just a little 6-Fiddy. but that wouldn't be a fair race, and I actually wouldn't even think about racing an Edge, Denali, Escalade or most 4 wheeled cages. Actually, I don't race on the street, but I will take off like a mad man sometimes. Bryce

Husky Liners... I got ours from www.AutoAnything.com These pictures were taken shortly after I took it out of the box where it was rolled up. It's now reformed itself and lays flat and fits better. We also got liners for the front and 2nd seats Bryce

Edge on 22's on ebay located in Morrow, GA (South side of Atlanta) $40,900.00 seems a bit much to me, and I'm not really into the look... but it is neat to see a dealer "pimpin'" one out Bryce

Part #7A1Z-17B807-AA for the MKX and Part #7T4Z-17B807-AA for the Edge. Now that it's been on all day and I've had a few chances to look at it, I have grown from liking it to really liking it. The one thing that changed it for me is that it's hardly noticeable until you are right on top of the back of our Edge. Being as thin as it is helps hide it from angles greater than a few feet away, but it does seem to be fairly tough material and while it wouldn't help if you dropped something hard enough to crack the bumper, it looks to be able to keep you from scraping your paint off more than a few times if you hit it with something like a suitcase or cooler. Bryce

Actually temps are looking to be about the same, but even though we're in a sever drought, the air is still humid and the evenings look to be cooler in Wisconsin. Sending my daughter up there in a plane this evening and going to rescue her next weekend. I can only take my extended family in small doses Bryce

I got pulled over within 24 hours of getting ours... 56 in a 45. the officer took pity on me for just having gotten a new car and let me go with a warning... I still wonder if he just wanted to check out our Edge. Bryce

From Ford Accessories. generally, I'd push people to do this themselves, but at $60something for the piece, it may be worth it to have them install. If they charge more than 1/2 hour to install, then they are ripping you off.you may want to see if a sign shop would install it for you if you bring it in... maybe save a few $$$ that way. If you were in Atlanta, our price for the install would be $25 if you brought it to our shop. the piece is on backing paper that's cut out to fit perfect on the bumper... no measuring required... just line it up with the bumper, tape it down like I described and then install. Bryce

We installed our Ford Bumper Protection decal this morning. While it wasn't something that we could have reproduced in our sign shop, we could have come up with something that would have been a way cheaper option. I'm happy with the product, but not the price and feel that it (or a nicer one) should have come included with the vehicle. It's basically a thick decal with some embossed things for traction and the word EDGE in it. Here's a few pictures.... I used a "hinge" install method where you place it where you want to go without pulling off the transfer tape or the waxed paper on the adhesive. then you put a strip of masking tape across the center (where edge is embossed) to hold it in place. Peal 1/2 away from the waxed paper and then squeegee down from the center out. then do the other half. No bubbles in ours, but then again we do this stuff for a living. Roughly a 10 minute install for us including surface prep to clean the bumper and remove the wax. Bryce