Jump to content

07 Edge lift gate "handle" loose


frebrd18

Recommended Posts

I noticed that my lift handle/trim panel on my lift gate for my 07 edge was loose. I think the 07s were the only hatches with no separate exterior indent handle on the bottom of the lift gate. The 07s have a release button and lift grip in the same place. I removed the inner trim panel of the hatch by removing the 4 screws in the 2 close handles on the bottom of the hatch and carefully pulling down the trim panel. It popped off very easily with no tools, much to my surprise. I tightened the trim panel with deep sockets and it tightened it up nicely. I then popped the trim panel back up, put the screws in the handles and slapped the panel tight. The trim panel is the hatch panel with the Ford emblem. I love this truck!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...