Jump to content

Brake Pads @ 26K


Recommended Posts

Pulled the wheels off the 2.7 Nautilus to paint the calipers.   Was expecting to see worn-down brake pads because I often brake pretty hard.  Ford brake pads must be a very hardened material.  All 4 corners looked nearly new with very little wear.  Made it worth the effort to pull the wheels off and the Ford Blue calipers look pretty good.  Only problem is the Black Label wheels cover up too much of the calipers and you cannot see them very well, but, well enough to see a difference from the original bare metal.

Link to comment
Share on other sites

I did mine at 96,000 miles because my rears were worn down to 2-3mm, and it was pretty easy to get them chattering after hard stops (adaptive cruise and mountain passes). the fronts were still over 8mm, could have gone a lot longer before replacing them, but I had ordered the parts and also was upgrading my smaller FWD rotors to larger ones. For some reason I skipped painting the calipers, I always do them on all cars I have owned, but didn't feel it with this one.

Link to comment
Share on other sites

Hard to believe these pads last so long.   They look nearly brand new.   Made my caliper painting project a much happier experience. 

 

I'll go out and clean my wheels and take a picture of how it looks.  Hopefully, I'll get some comments on them.  The wheels are beefy; therefore, can't see the calipers as well as I'd like.

Link to comment
Share on other sites

Great to hear 1004ron !  I'm just happy I don't have to remove the wheels in the near future to install new pads.  Those 21's are hea-VY.  Here are a few pics of the brake calipers, as promised.   Can't see them very well, but, they look a little better when the sun is not directly overhead and casting shadows.

 

20260306_112323_resized.thumb.jpg.73f8d2d3182b3d584b9b574637f4db6a.jpg20260306_112341_resized.thumb.jpg.f9953014acfec59907d3e9e69bbe3cea.jpg20260306_112341_resized.thumb.jpg.f9953014acfec59907d3e9e69bbe3cea.jpg  

20260306_112351_resized.jpg

20260306_112404_resized.jpg

Edited by jbrumley1
To remove duplicate photo
  • Like 1
Link to comment
Share on other sites

2 hours ago, dabangsta said:

I did mine at 96,000 miles because my rears were worn down to 2-3mm, and it was pretty easy to get them chattering after hard stops (adaptive cruise and mountain passes). the fronts were still over 8mm, could have gone a lot longer before replacing them, but I had ordered the parts and also was upgrading my smaller FWD rotors to larger ones. For some reason I skipped painting the calipers, I always do them on all cars I have owned, but didn't feel it with this one.

How many miles do you and 1004Ron have on your Edge vehicles?  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...