gonesail Posted yesterday at 06:07 PM Report Share Posted yesterday at 06:07 PM So it's been a week since I finally was able to change 4 of my 2016 edge settings using Forscan. Simple things like disabling auto locks and seatbelt chimes. I get into the vehicle this morning and all of them are reset to the original values. I drive it on a daily basis. For no reason that I can understand this car continues to amaze (irritate) me. So my question is: is this normal? 1 Quote Link to comment Share on other sites More sharing options...
1004ron Posted yesterday at 06:46 PM Report Share Posted yesterday at 06:46 PM I don't have an explanation for what you're experiencing but can confirm that none of the changes I've made using Forscan have reversed themselves. 1 Quote Link to comment Share on other sites More sharing options...
Wubster100 Posted 21 hours ago Report Share Posted 21 hours ago I don’t think this is possible. Did the AsBuilt really change? Have you actually compared the hexadecimal values to confirm a change? Quote Link to comment Share on other sites More sharing options...
gonesail Posted 3 hours ago Author Report Share Posted 3 hours ago 17 hours ago, Wubster100 said: I don’t think this is possible. Did the AsBuilt really change? Have you actually compared the hexadecimal values to confirm a change? Good question. I used the BdyCM module and ran it from there. Then double click on the setting to get the enable or disable checkbox. Then wrote out the changes which were successful. The changes were confirmed and stayed that way. But the vehicle went back to the old settings. I am a bit nervous dealing with binary and hex values. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.