KonaSport11 Posted February 23, 2011 Report Share Posted February 23, 2011 My screen stopped displaying the colours (green, yellow, red) of the distance the Edge has left in reverse before it hits something. It also stopped showing the stripes to back the car between two parking stripes. The audible beeps still function though. Any ideas how to resolve this without taking it to the dealer? Quote Link to comment Share on other sites More sharing options...
donway Posted February 24, 2011 Report Share Posted February 24, 2011 If I recall my manual dealt with that on page 260 or so. I think menu, then vehicle settings, then rear camera and I believe there are options from there. Sorry, working from memory Quote Link to comment Share on other sites More sharing options...
KonaSport11 Posted February 24, 2011 Author Report Share Posted February 24, 2011 If I recall my manual dealt with that on page 260 or so. I think menu, then vehicle settings, then rear camera and I believe there are options from there. Sorry, working from memory I never touched the settings, but will have a look and see if it can be fixed. Thanks for responding. Quote Link to comment Share on other sites More sharing options...
KonaSport11 Posted February 25, 2011 Author Report Share Posted February 25, 2011 All fixed through the touchscreen. The settings were in the OFF mode, however, this must have done its own somehow. I'm finding this is happening a lot with the touchscreen and the voice commands... Quote Link to comment Share on other sites More sharing options...
richy Posted February 27, 2011 Report Share Posted February 27, 2011 All fixed through the touchscreen. The settings were in the OFF mode, however, this must have done its own somehow. I'm finding this is happening a lot with the touchscreen and the voice commands... That had happened to me too. I did not change it but it changed to that setting. I just changed it back. It has not lost it since I did that and it must have been a month or more ago now. Quote Link to comment Share on other sites More sharing options...
wilsons66604 Posted March 1, 2011 Report Share Posted March 1, 2011 When the system reboots, those settings are turned off on the original version of software. I was looking for the settings the other day and I couldn't find them. i think the 2.4 update has removed the option to toggle them on & off Quote Link to comment Share on other sites More sharing options...
.jpeg.ae6e0b145aa444b340e3c8486d471803.jpeg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.