Jump to content

OEM backup camera for 2013 Edge SE?


Recommended Posts

Does anyone know if the Edge SE model has the factory wiring already installed if I wanted to install the reverse camera? If not, would it still work with the oem camera? My 2013 SE has the 101A package with the sensors on the rear bumper. Anyone that can chime in would be much appreciated. Thanks

 

Here is the part # for reference- BT4Z-19G490-B

Link to comment
Share on other sites

I was hoping I could just look at the center screen on my dash. I think its the 4.2 inch screen. I wanted to try to keep it oem but if that's not possible what would be my best option? I went to my dealership where I bought the car and they could install the rear view mirror with camera but wanted to charge $600.

Link to comment
Share on other sites

Edged Up,

 

This is why I was asking if it could be done on the SE model. I found this SEL appearance package that has the same screen setup as mine and it has reverse camera. I don't have dual climate control. So it looks like it might be possible?? See pics below.

 

Pic of my screen is the last one on the right.

post-27293-0-34036900-1401684162_thumb.jpg

post-27293-0-00709900-1401684175_thumb.jpg

post-27293-0-52883200-1401684182_thumb.jpg

post-27293-0-06051700-1401684698_thumb.jpg

Edited by toast1850
Link to comment
Share on other sites

Oh damn! You just schooled me. Thanks! I was not aware of that! That looks good!!!! Now my gears are going! And why are we the only two on the thread!!!! Some one else gotta chime in. I want this in my car and cant see spending $1000 for Ford to plug in a camera and change a setting.

 

You've done more research than me and that looks better. OEM.

Link to comment
Share on other sites

Yea hopefully someone else that may know more info can chime in and help. I have also heard something about ford going in and changing a setting to make it work. I want to try and keep it OEM if possible, just looks much cleaner that way.

 

P.S.- Didn't mean to school you or offend you in anyway if I did, I've just been really curious if this would work and I happened to just browse upon that SEL with that option. I didn't even know it had the camera until I opened the pictures.

Link to comment
Share on other sites

No offense man! All good. You educated me better said. I like what you found better. OEM all the way. I want it to look like Factory. Not a sarcastic thanks. Thanks for real bro. I just gotta find some one at the dealer that will walk me thru what they would do. I like that option.

Link to comment
Share on other sites

I hear ya. I should have purchased the SEL with all of the options but too late now. If you find someone at the dealership please let me know how/if it can be done. I think it's possible, but I'm guessing wiring will have to be ran and something at the dealer will have to activate the camera into the screen.

Link to comment
Share on other sites

  • 3 weeks later...
  • 2 months later...
  • 1 month later...

As far as trying to get a factory camera to work in the SE, I don't see how you could. The factory camera uses the center MFT screen so how could you have the camera without that screen unless you went aftermarket? That is just the starting point. As far as the SEL without the camera, that is more likely since you have the MFT system but just missing the camera. Sorry I can't answer it more specifically than that but just pointing out the obvious.

Link to comment
Share on other sites

chipworkz,

 

 

See my post from Jun 1 on this topic.

 

I attached a picture of an SEL that has the reverse camera with the 4.3'' screen setup without MFT.

 

I know some of the SEL's that aren't upgraded to MFT have a 4.3'' screen just like my SE.

 

I've also seen some of the new XLT F-150s with a 4.3'' screen with reverse camera.

 

I'll try to remove the plastic cover under my hatch on the rear where the camera is installed and see if there is any harness to plug into. Probably not, but worth a shot.

Link to comment
Share on other sites

Oh yes I messed that. I was thinking you were talking about the 4.3" screen by the speedometer, not the small one in the center. I am new to the edge too but have done a lot of reading on here since I got it. There was mention that Ford stopped using the one size fits all wire harness so like you say, you just need to see if the wires are there or not number one. The next question will be if the head unit has the module for the camera or not. Then is there anything different in the software and so on. Hopefully it is just a matter of adding the camera in the back but until you dig in or talk to someone with Ford that has all the answers it is hard to tell what all would be missing or is different. Sorry I know I am not adding much value here. :)

Link to comment
Share on other sites

  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...