snmjim

Jack placement can be Fwd or Aft of jackstand placement point. As long as you're on the pinch weld. Be sure to use a cushion on the jack point i.e. rubber or wood block..;-)

I don't usually use this word but it definitely applies here...that is totally cute...

Left & right front pinch weld points one at a time as you place jack stands.

You're correct, lift anywhere but on the suspension...;-)

As stated in the post...I'm unsure about selling so make me an offer I can't refuse. Shipping would be excessively costly, would prefer to meet halfway if it's a reasonable distance.

You are most welcome Xtra, you are worth it Brother because you're an awesome person!

Anne Arundel Co MD

Not unless yours are excessively corroded.

As far as audible signature...ABSOLUTELY!...

Status/Update: 08 Aug 2018 Per John Wright (ADDCO Rep): All bars have shipped as of last Wk. Note: 1 extra bar remains available...

Give consideration to this Mod, especially if your going to run modified Turbos. If your an Ole school gear head like me you've had your fill of noisy performance and prefer sleeper power... Remove your resonator but keep it should you ever want to revert back. Have straight pipes installed in place of the resonator. Results: - No low or high end droning - Turbos breath better - Better power response - Does not affect emissions - Loss of 17.8 lbs - Gains of 1-2 miles per gallon Sound sample: Thnx goes out to Special K for this one... JC Perf Dvlpt

And not installed yet..lol

We find it surprising and some what disappointing that there's any question as to the effectiveness of the JLT Catch Can considering all of the time & effort we've put into nonbiased R&D documention on pg 5 of this topic string.

There's only the one for the rear however, I notified the ADDCO POC...;-)

We requested that they did, so that makes you one of the lucky ones...

You would still have to buy a programmer/Tuner plus a Tune per octane. This Tuner sells for anywhere between $300-$400. Then you have to buy each Tune individually. However you have to check with the Tuner of your choice for which Programmer/Tuner they want you to use, how much it costs and how much for each revision when you make a change. However...if you in fact have a 2016-2018 Edge Sport and depending what was done to the motor so far and if your willing to chance it I'd be more than willing to leave the tunes on it that best match your build but I don't think custom Tunes can be shared because their VIN locked and of course this would be at your own risk...

TOTALLY AGREE!...

No, because my Tunes are customized to my build and if you tried to use them without the exact same build you could go zoom zoom BOOM!

Selling SCT x4 in excellent condition in original box with all accessories, Selling due to new Tuner requirement. Ref "Classifieds" section. $250...

Selling SCT x4 due to new Tuner requirements. Device used with Unleashed Tunes and in excellent condition. Comes in original box with all accessories as when new. $250...

Stock Turbos with 58k in good condition no leaks. Oil changed every 3500. Selling due to modified Turbo change out. $500 for the pair obo... Note: the Pic is of the rebuilt pair not the pair for sale because I haven't pulled them yet however, aside from the recoated surface they're identical.

4 wheels in perfect condition Plasti Dip Matt black, no scuffs with TPMS x4. Just put new All Season tires with only 500-750 highway miles. I'm on the fence about selling, so make me an offer I can't refuse... Check them out at my "Gallery" before they were Plasti Dipped. All 4 are as good as the one Pic

My post on page 11 of this topic string should have what your looking for...;-)

Working on it...

Status/Update: 26 Jul 2018 Per John Wright (ADDCO Rep): - Raw material has arrived - 16 orders to date - ETA 2-3 weeks