Cooling fan PLUG part number?

[jesus_lomor]

Hi all,

 

I am looking for this cooling fan connector (Not the module) but  I couldn't see any part number on it. Does anyone knows how to find it?

 

I have asked in some stores, but they all say that I have to buy the complete cooling fan assembly, and I really don't want to do that. I gess this happened because of a loose terminal.

 

Thanks in advance!

[WWWPerfA_ZN0W]

Ford should have this available in their catalog, I would think.  RockAuto.com is showing a radiator fan relay connector (and also a motor connector):

https://www.rockauto.com/en/catalog/ford,2007,edge,3.5l+v6,1434490,electrical-connector,radiator+fan+relay+connector,18946

 

but it is not the right part.

[jesus_lomor]

8 hours ago, WWWPerfA_ZN0W said:

Ford should have this available in their catalog, I would think.  RockAuto.com is showing a radiator fan relay connector (and also a motor connector):

https://www.rockauto.com/en/catalog/ford,2007,edge,3.5l+v6,1434490,electrical-connector,radiator+fan+relay+connector,18946

 

but it is not the right part.

 

Thanks man, I took a look on the web page but unfortunately couldn't find it. I'll keep digging.

 

But, thanks for the link, it has really nice information.

[GM1]

Hi,

 

I have the exact same thing, my connector from the relay to the fan looks like this (see picture),

How did you fix it?

 

Thanks

[handfiler]

This is a common issue on a lot of Fords. The fan has a high current draw when it is in good shape and it gets worse when the fan gets older. The plugs are typically the first area to experience a conductive loss and that results in higher resistance which causes the meltdown. Make sure the replacement connections are clean and tight when you replace them.

It would also be a good idea to check the current draw of the fan once the connection is repaired to make sure it isn't exceeding the fuse/wiring ratings.

[GM1]

Thank you for your quick response, 

Any idea where can I get such connector? 

[BlackEdition]

On 12/29/2018 at 10:17 AM, WWWPerfA_ZN0W said:

Ford should have this available in their catalog, I would think.  RockAuto.com is showing a radiator fan relay connector (and also a motor connector):

https://www.rockauto.com/en/catalog/ford,2007,edge,3.5l+v6,1434490,electrical-connector,radiator+fan+relay+connector,18946

 

but it is not the right part.

 

On 8/28/2019 at 4:28 PM, GM1 said:

Hi,

 

I have the exact same thing, my connector from the relay to the fan looks like this (see picture),

How did you fix it?

 

Thanks

 

I have the same exact problem as your image. My fan connector got fried and now im driving without the fans working.

 

I looked around for the complete wiring harness for the radiator fans but couldn't find any, so I guess the only way is to cut the wire and replace the plug.

 

Anyone knows the part number for the plug alone (or the entire wiring for the fans)? I couldn't find any:
https://www.rockauto.com/en/catalog/ford,2013,edge,3.7l+v6,1504152,electrical-connector,radiator+fan+motor+connector,2556

[BlackEdition]

After hours of hunting around, I finally found the little bugger! $1 for a connector and a bit of wire isn't bad to fix a major cooling issue. I think cutting the burnt connector and attaching the new one should fix it as unplugging it and plugging it back on made the fans work again, but that only lasted about 3 days. I doubt my entire fan wiring or the controller is compromised.

 

https://aliexpress.com/item/1005002760807461.html

 

This is the only connector that I think needs replacing, I just need someone to confirm before I buy and wait 1-2 weeks to get here?

 

(2013 Ford Edge Sport V6 3.7L, without tow package)