WWWPerfA_ZN0W

Welcome to the community, glad to have you and your MKX aboard! Are you going to be installing a flashing LED light bar to go with that nickname? How long have you had the MKX?

A few pics of the rotors on mine:

I use the standard TYC filter. Aim to try the ATP carbon filter next time.

Welcome to the forum, and congrats on your Edge! Didn't take you long to make it your own

Get a good quality torque wrench! Many out there are pure junk.

You might have luck finding aftermarket COPs on EBay. I just saw a set for under $160 from a reputable seller. EMail the seller alanisdeals to see if they have any for the Edge. They have many satisfied customers for Ford COPs, at a very reasonable price. OEMs will run around $92 per COP. My Edge's spark plugs were gapping at 0.070+ after 80K miles. So yeah, changing them could help. Plus changing the PCV valve at the same time would be a good idea.

Though not my top choice, Power Stop Z16 brake pads seem to be working fine for me: http://www.amazon.com/Power-Stop-16-1258-Ceramic-Brake/dp/B007K1JXA0 http://www.amazon.com/Power-Stop-16-1259-Ceramic-Brake/dp/B007K1JXHI/ A more expensive option is the Hawk HPS, but they are sold by a third party.

Get it fixed, Nick?

If it's burnt badly enough, there are aftermarket sockets that work well. A search on the forum should turn up links/names.

10 days we've been waiting, 10 days anticipating ...

There are a couple of videos up on YouTube that may help you out

Welcome to the community, glad to have you and your '10 Edge here! Put up some pics so we can figure out what all it needs by way of mods to keep it running

I believe there are aftermarket installs for the Gen 1 Edge that maybe you could see if it works for you. http://www.fordedgeforum.com/topic/2016-thinking-of-replacing-my-edges-navigation-system-with-aftermarket/ http://www.fordedgeforum.com/topic/3564-aftermarket-audio-wiring-harness-recommendations/ http://www.fordedgeforum.com/topic/7415-edge-mid-range-touchscreen-stereo-upgrade-top-to-bottom/ http://www.fordedgeforum.com/topic/1604-stereo-upgrade/ http://www.fordedgeforum.com/topic/10959-08-edge-build-log

Congrats on your Edge and welcome to the forum! CAI won't really do much for performance, at least by itself, but can really improve the looks. I assume you have the 3.7L? You could probably add a CAI, bigger TB, dual catbacks ALONG WITH (most importantly) a custom tune (e.g. from Unleashed Tuning in FL torrie@unleashedtuning.com). THEN you would get that SPORTy feeling you so desire :D

Do you have active shutters on your Edge, traxiii?

Is it consistent as to when & where this happens? Could be weather or electronic interference. May also need re-aiming/re-alignment. Finally, the sensor itself may be faulty. Supposedly there is a TSB for this, but I have not been able to locate one yet.

Nice! Welcome to the forum, and good luck with your (wife's) Edge. These vehicles are great for road trips; log some miles and tell us what you think!

Could be an intake gasket failure or oil cooler failure as well, just to add to the confusion ... http://www.2carpros.com/articles/coolantantifreeze-in-the-engine-oil

Probably should replace the TSS and OSS in pairs, to avoid the dreaded ODO Error that crops up later on in the service life. Any trouble with shifting or does it feel like there is a misfire? Wheel speed sensors are also known to go bad from time to time. And BTW, try cleaning the MAF sensor with MAF cleaner to see if that makes any difference. It can cause symptoms like a slipping gear or hesitation or power loss etc.