PrinzII

It would be nice if the EcoBoost 3.5 (340 hp) was packaged in these.

My wife and I plan to continue service but with the new head unit.

I started to polish the outside of the Edge but the #@$%@ pollen kept screwing things up. I am going to revisit this next weekend.

Phase I: Cleaning the Vinyl Product Used: Ultima Interior Shampoo Gel The Edge's vinyl was starting to get somewhat dirty which led me to tackle that first. Before starting that, I swept out the cracks and crevices using a detailing brush. After that, I swept out the vents using a different brush. Next, I removed the rubber inserts for the cup holders and the spot on top of the dash. I sprayed some of the interior shampoo and agitated it to remove any grime. Since this product is no-rinse, I just had to wipe it off. I then cleaned out the areas as well as the shifter console. After cleaning the shifter console, I wiped down the steering wheel and the vinyl on the driver's side door and the dash.

SOMD: Did you get the lights installed?

I had the alignment TSB done and it does track much better.

Ugh!....I was hoping for the 3.5 L 340 hp EcoBoost.

...unless they plan to bring out the EcoBoost.

If I get a chance, I'll post one.

Edgy: How is the quality of the repair? Most importantly, how is the paint since you have a pearlescent paint?

That's what the dealer told me. I think it's BS.

Who else has done this?

The grille is plastic.

My idle speed hasn't changed that I am aware of.

Technically, the "oil" you mention is actually silicone. Many silicone based protectants do not provide adequate UV protection and, as a result, will crack.

We've got 4k on our Edge and we love it.

No, I do not have the wiring. Even if I did, I'd have to replace the switch.

Didn't know you had an Edge.

Are you doing low beam only or high and low beam?

Doesn't look like the idle speed has changed.

How is the ride with the springs?

The dealer is researching this for me. According to another person who works there, I would not only have to require the harness but also an electrical module. If I have to do all of that, I am going to have to go aftermarket since it would be highly expensive to add them with the proper modules. However, the wierd thing is that when I researched the parts list at Team Ford, there is nothing about modules listed.

Definition of digital ballasts taken from a hydroponic site: http://www.bghydro.com/BGH/static/articles...igiballasts.asp

Are your ballasts digital?

This was done under warranty by the dealer.