Timmer

Looks interesting. Do you know if this stuff is available yet?

Welcome Dark Sport! Post #24 on the following link user "Eatinitup" made a little tutorial that he had fun with... http://www.fordedgeforum.com/topic/12151-led-light-bar-install/page-2?hl=pictures&do=findComment&comment=96796

Thanks Dingo So thats 6 x .5w = 3w total This light that has 8 5630 SMD LEDs might be brighter... http://www.ebay.com/itm/370806407784?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 I looked up the output for each 5630 SMD LED and the 2 places I found any info says they are also .5w each... http://www.superbrightleds.com/moreinfo/component-leds/samsung-natural-white-5630-smd-led/1385/ http://szgmled.en.alibaba.com/product/548656923-213446509/high_lumen_led_smd_5630_Top_100_led_.html So that would be 8 x .5w = 4w total... Now i guess that could be only for the 5630 leds that those sites sell but I would think all 5630's would be the same. Right? or am i getting this all wrong? What do you think Dingo?

Has anyone changed their pool lights to LED's? I was looking at these... Pool http://www.ebay.com/itm/546-LED-multi-Color-swimming-pool-light-lamp-12-volt-edison-/130913655564?pt=LH_DefaultDomain_0&hash=item1e7b0fdb0c Spa http://www.ebay.com/itm/72-LED-multi-Color-swimming-spa-pool-light-lamp-12-volt-edison-/130912550339?pt=LH_DefaultDomain_0&hash=item1e7afefdc3 I was also looking into how hard it is to change the lights. From what I have found you do not need to drain any water because the whole light fixture is enclosed and has a long cord that you bring above the water level to change the bulb. Has anyone else ever changed a pool/spa light out before? Thanks, Tim

Where would one find these 6 1/2-watt beast's?

High Power? http://www.ebay.com/itm/280939813173?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 A little larger SMD LED's http://www.ebay.com/itm/370806407784?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 You probably cant go much bigger that that in the pud's can you?

What about these Dingo? http://www.ebay.com/itm/2-x-Car-35mm-White-9-SMD-5050-LED-Festoon-Dome-Light-Lamp-Bulb-DC-12V-NEW-/160905181609?pt=Motors_Car_Truck_Parts_Accessories&hash=item2576b239a9&vxp=mtr Tim

That's nasty looking, never seen anything like it.

Congrats!

Are you talking about the rear view mirror inside the car or the driver side, side view mirror? I know the interior rear view mirror auto dims on my '11 sport but I don't think either side view mirror auto dims...

Do the vertical light pipes only work during the day if you have drls? As in if your headlights are on during the day... ??

I wonder if they are true 9012 bulbs or if they will just send you 9006's...

Hmmm, good idea. I just might have to try that to see if the 9006's will work. Was this done on 9006 or 9005 bulbs? TIm

Well the 9012 bulbs went in without a problem! The 9012 base with the o-ring looked slightly smaller then the 9006 bulbs. I pushed on the 9006 o-ring to make sure it was fully seated and it seemed like it was even though it was sticking out further slightly on 1 side. So maybe that is why the 9006 bulbs are a pain to get it? The color of both 9012 bulbs look consistent with each other and put off decent light. It does seem like the driver side HID bulb return wire isn't at the top like it should be though. The driver side has a slight "dead" spot when light is projected ahead. It looks similar to Rusty's same issue he had before switching to the 55w 9005's. At the same time they are not as bright as I would like them to be so I might just get another kit, DDM 55w 9005 5k Morimoto Harness. I am even thinking about the whole Morimoto 50w 9005 5k HID kit. I have only bought HID kits from DDM before so what does everyone else have? ??? Morimoto 50w 9005 5k OR DDM 55w 9005 5k ??? Tim

This is the "Welcome Forum!" not the "Classifieds" section...