Edge-y Posted January 3, 2021 Report Share Posted January 3, 2021 Alright guys. I have a problem. I installed some LED headlights on my 2014 SEL. I’ve done this numerous times on vehicles with and without projector headlights and never had this problem before. In the pictures you can see a hard line where the light cuts off. This should not be happening. And I’ve done everything to make sure that they are 100% in correctly. Has anyone else had this issue? Any advice is greatly appreciated. 1 Quote Link to comment Share on other sites More sharing options...
Perblue Posted January 3, 2021 Report Share Posted January 3, 2021 Pics? However I'm betting what you are talking about should be happening. That gen has a shutter that comes down for low beam and high beam opens the shutter. Quote Link to comment Share on other sites More sharing options...
enigma-2 Posted January 3, 2021 Report Share Posted January 3, 2021 Try rotating the bulbs and reinsert. LED hot spot may be hitting point of focus off-center. Quote Link to comment Share on other sites More sharing options...
Lou H Posted October 29, 2021 Report Share Posted October 29, 2021 I don’t have led’s in my 2014 Edge but I do have them in my 06 Colorado and that is the way the lights work in it. Like a black wall at the end of the light beam. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.