On 7/5/2022 at 7:06 PM, 1004ron said:

Also on Amazon:

https://www.amazon.com/dp/B013GU2VTI/?coliid=I29T2MXYNEX3SF&colid=17XD4QIGE1U54&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it

On 12/10/2023 at 5:33 PM, fishx65 said:

Just had my first TPMS sensor die in my 2011 SEL.  I'm guessing it's a good idea to replace all of them  since they're 13 years old?. Any decent aftermarket brands out there????

Yes.

Haven't dealt with this before, but suspect its the sensor behind the bumper - if its clean then try disconnecting is and see it the behavior stops.

I use the OBDLink MX+ with Forscan.

The symptoms you describe point to a problem with the alternator and/or battery, so I'll ask how you went about testing both.

19 minutes ago, Doorpro said:

Thanks for the info dabangsta. Do I have any options to get Carplay to work and keep the wife happy?

Do a search for converting to SYNC 3

It requires new hardware and is fairly pricy.

You could also look on Critchfield for 3rd party systems.

The only advice I can offer is to find a reputable real mechanic - not easy to diagnose here based on that description.

28 minutes ago, DrivingofftheEdge said:

I guess this over priced team rxp set up is junk?

It does appear so.

I google search for reviews indicates that many are happy with the RXP.

For continuity threads were merged.

I just checked my JLT/J&L catch can and it was 3/4 full of a condensate oil mix.

Mine is about 6" higher than the PCV.

If yours isn't collecting anything, particularly in winter, then contact the supplier for answers, or you could contact J&L to see if they have something for your model.

https://sbfilters.com/collections/oil-separators

I see the install on the 2.0L is a little more work - need to pull the intake manifold back.

On 12/6/2023 at 4:47 AM, RrmyGuy said:

I bought it from rockauto.com,  it's a centric brand master cylinder. It wasn't the cheapest, but it was listed as the favorite part. 

This is likely the same issue with the radiator cooling fans and their control module i.e. non-OEM replacements don't work.

If you've had the master cylinder off then you'll need equipment to perform the ABS bleed procedure.

My J&L CC is about the same height as the PCV valve on my 2.7L and works as @handfiler mentioned above.

I would not mount the CC higher than the PCV - gravity would be working against it.

Edit: or the CC higher than the PCV would result in nothing getting up to it or past it, but if that theory is correct the  how is the oil getting to the areas you've reported.

Sounds like you're throwing parts at it without any diagnostics, which most often works out a whole lot more costly - if you don't have the diagnostic equipment and skills it might be best to take it to a reputable service shop.

Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) 1 QT - $0.99

https://www.tractorsupply.com/tsc/product/valvoline-maxlife-multi-vehicle-automatic-transmission-fluid-(atf)-1-qt-1138761

Only good for pick up at store.

46 minutes ago, kruzr1 said:

I've used weathertech before and they installed easily and were  durable. Unfortunately they don't make a set for the ST model.

I have these on my 2017 Sport - don't know if the trim is different on the ST - you could contact the seller and ask about the ST

A-Premium Set of 4PCS Mud Flaps Splash Guards Mudguards Mudflaps with Hardware Kits Accessory Compatible with Ford Edge (Sport), 2017-2020

Edit:

A-Premium Set of 4PCS Mud Flaps Splash Guards Mudguards Mudflaps with Hardware Kits Accessory Compatible with Ford Edge ST 2019-2020

9 hours ago, NzP said:

Finally I replaced a torque arm with an OEM. Now I feel just a little vibration but a brend new OEM tensioner still slightly jumps. Like I said I put a new harmonic balancer and belts. Still no codes(never seen any codes). I tried to spin alternator and AC pulleys by hand, could not feel any problems with bearings...

What are you using to read codes?

What brand switch were the duds? - just so that others know what to avoid, although for items like this I'd stick with OEM.

What RPM for the pressures you listed?

Is the light on all the time or at idle only?

9 hours ago, edjunior said:

Do you still have a factory warranty on this?  Why don't you take it in and make some good use of the warranty?  

AntB  is in Poland.

AntB please add location (Poland) and your vehicle Model/Year to your profile signature - https://www.fordedgeforum.com/settings/signature/

18 hours ago, Palalcocar said:

Hi everyone. Today after changing the battery, my radio got stuck. Now it's asking for an unlock code. Does anyone have this code? Any suggestions? Thanks in advance!

It looks like you're in Romania.

Please add your Location and vehicle Model/Year to your profile signature  - https://www.fordedgeforum.com/settings/signature/

Take your proof of ownership to your local dealership and they should be able to provide the code.

.

4 hours ago, EdgeMor said:

Thanks for accepting me !

Welcome - please add your location and Model/Year to your profile signature - https://www.fordedgeforum.com/settings/signature/

46 minutes ago, amer fatayer said:

Hi all, 

I purchased a 2022 Mach e and it comes with full Chinese infotainment system. I cannot find a way to change the language so was wondering if there is a manual way to install the english infotainment system on the car?  

Are you aware that this is not the Mustang forum? - its specifically for the Ford Edge models.

I see that you're in the United Arab Emirates - where did the vehicle come from, what market region?

https://www.fordedgeforum.com/topic/30454-rough-idle-when-coldp0301-code-coolant-intrusion-tsb-22-2133/?do=findComment&comment=222715

oskar27  Take just a little time to go through this thread and you'll likely find the answers to all your questions on this subject, including a video on how to determine your engine's manufacturing location.

On 10/27/2023 at 12:15 PM, Torr22 said:

My edge is doing this today. Does anyone know what the fix is? 2019 Ford Edge SEL AWD

Have you considered any of the suggestions in this thread?

Looks a lot like the Mustang Mach-E

I couldn't live without the rear load capacity of the Edge, which that vehicle doesn't appear to have.