1004ron

1 hour ago, Len Woodruff said:

Mine is the 3.5 V6

https://www.fordedgeforum.com/settings/signature/

On 8/29/2019 at 4:47 PM, robertlane said:

We turned those two feature requests on.  As for the dark theme, I totally agree and I am note sure why after of these years it's not part of the software!  Very frustrating.

Any chance of this being corrected?

9 hours ago, Len Woodruff said:

 

I put it in my Profile not sure why it doesn't show.

 

2015 Ford Edge Titanium 

Its been an issue with this forum for a few years with the owners showing no interest in correcting it, and that's why it was requested that you add that detail to your signature - https://www.fordedgeforum.com/settings/signature/

I have the JLT catch can installed.

J&L Mustang 3.0 Oil Separator; Black Anodized; Passenger Side 3014P-B (11-17 Mustang V6) - Free Shipping (americanmuscle.com)

2015 FORD MUSTANG J&L Oil Separator Co. 3014P-B J&L Oil Separator Co. 3.0 Oil Separators | Summit Racing

The installation looks the same as the below.

Please add you Model/Year to your signature - Settings - Ford Edge Forum

When I changed spark plugs on my wife's 3.7L Mustang I found oil in the intake - I replaced the PCV valve and installed a catch-can and no longer get oil in the intake.

I doubt that the engine braking would cause this.

I don't believe there's a way to remove it, but I use 303 aerospace protectant to mask it.

2 hours ago, enigma-2 said:

Probably not. I had a windshield leak     after replacment, glass company applied extra sealant where needed. Five minute job.

 

Did you have to pay for the windshield? Can you share the price? (Curious about what a modern windshield costs now).

I stopped in at their shop on Friday and the identified an error made by the installation tech - they confirmed that the windshield will be removed and didn't do so on Friday because they didn't have stock of mine - the senior tech says that they usually install a complete new one because during removal it often breaks and the time to clean the sealant off the old one also makes it cost effective to use a new one.

A few days after the windshield install I went through the car wash and when I got home I saw a little water on the drivers side mat, so went through the car was again this afternoon checking the mats are all dry before - I have a leak.

Will call tomorrow to schedule the fix - wonder if it means removal to reseal.

Two threads merged - one was in "Off topic Lounge".

Here's a direct link for you to add your vehicle details to your signature: Settings - Ford Edge Forum

I'm not an expert on this but believe that it is possible to add NAV but it would need a new APIM and GPS antenna - this is what I did on my wife's 2015 Mustang.

I can PM you the contact for the person that sold me all the Ford hardware needed, all configured.

On my 2017 Edge Sport I no longer use the in dash NAV after getting a wireless Carplay device - Waze is all I use for navigation.

I would start by reading the stored error codes using Forscan or other device that's know to have the capabilities with Ford.

After that I'd use the scanner monitor the O2 sensors paying particular attention to when the engine is warmed and the A/F ratio switches from Open Loop to Closed Loop.

See what I was getting at with regards the scanner?

I would start by checking out the transmission selector and linkages, and the connector to the transmission range switch - if that all checks out good then get a wiring diagram and confirm the range switch is giving the correct output at its connector when selecting each gear position.

My model had a recall due to issues with the synthetic bush connecting the cable to the transmission range lever - wonder if that's good on yours.

Maybe @Haz  could help with the wiring diagram.

Safelite replaced my windshield today and did a great job.

The only trim removed was the plastic cover at the bottom edge of the windshield.

The spec label on the lower right corner is exactly the same as the original windshield.

They took it for a 10 minute drive with their calibration device - I never use the lane guidance but tried it on the drive home and it works as it always has.

45 minutes ago, tmise40 said:

Or maybe a BlueDriver huh…so says Scotty Kilmer and Chris Fix!

I wouldn't be taking any advice from that Scotty fool.

The BlueDriver is a good OBD2 adapter, so that adapter with ForescanLite  (Free) will reliably read the codes, which will most certainly be there based on the symptoms you describe. 

41 minutes ago, tmise40 said:

Snap-On $2000 OBDII , reputable like I said

Agreed, reputable, but if it were me I'd scan it with Forscan or Forescan Lite.

That's my recommendation based on personal experience.

Quote

No engine codes are present, checked with a reputable OBDII scanner

What scanner is that?

I doubt that kerosene would do much for the sludge build-up on the oil pump suction strainer and the screens on the VVT control valves if the engine isn't run.

Most folks are very wary of using an engine flushing product, but I think when an engine has been allowed to sludge up like this it may be the only option - if you do this plan to do a good few short interval oil & filter changes.

PTU drain plug drill and tap - Page 10 - All Wheel Drive (AWD) - Ford Edge Forum

Any quality fluid that meets or exceeds the specs in your owners manual is suitable for your Engine, Transmission, RDU (Diff) and PTU.

I use Ford fluid for the Trans, Mobil 1 for the Engine, and Amsoil for the PTU and RDU.

Transmission Fluid Replace? - Transaxle (FWD) - Ford Edge Forum

Try the forum URL in Google with key words.

Still getting errors.

User "warnerro_edge201" doesn't show on a member search.

An error occurred (500 Error)

We're sorry, but a temporary technical error has occurred which means we cannot display this site right now.

User warnerro_edge201 already has more than 'max_user_connections' active connections

You can try again by clicking the button below, or try again later.

Try again

Fatal error: Uncaught IPS\Db\Exception: User warnerro_edge201 already has more than 'max_user_connections' active connections in /home/warnerro/public_html/fordedgeforum.com/system/Db/Db.php:205 Stack trace: #0 /home/warnerro/public_html/fordedgeforum.com/system/Db/Db.php(118): IPS\_Db::_establishConnection('IPS\\Db', Array, true) #1 /home/warnerro/public_html/fordedgeforum.com/system/Session/Store/Database.php(77): IPS\_Db::i() #2 /home/warnerro/public_html/fordedgeforum.com/system/Session/Front.php(283): IPS\Session\Store\_Database->updateSession(Array) #3 [internal function]: IPS\Session\_Front->write('60fbcf32ea62466...', '') #4 {main} thrown in /home/warnerro/public_html/fordedgeforum.com/system/Db/Db.php on line 205

This forum is the slowest out of all the ones I frequent and at times, like this morning it just fails.

If you're really confident that the VVT equipment is good, then its likely the timing has jumped.

Checking the resistance of the VVT valves isn't confirmation that they're working.

Next step would be to use a scanner to verify the Crank / Cam timing correlation.

What's the oil change history - oil change interval, oil used and oil filter?

Have you checked the Variable Valve Timing oil control valves?

HOW TO FIX CODE P0015, CODE P0016, CODE P0017 ANY CAR, ENGINE LIGHT ON - YouTube

@Haz  thanks very much for that.

Any chance you have instructions for removing all the trim, glass, etc. and re-installation?

@Haz   any chance you have instructions for the windshield replacement?

Of course I'll be watching the whole process.