Platinum White

Thank you all for the information. Merry Christmas and Happy New Year

I need a hot always fuse on the cabin fuse panel. Thanks

I found out from an older post by MNTNedge about a fuse that is powered with the start button. I used fuse #23 for my radar detector and GPS. The radar detector works fine, however the GPS shuts down when the car is turned off and reboots each time the engine is restarted. I want to power it from a non switched source. I have been told that the spares are non switched and tried fuse #5 that is a 20 amp spare circuit. It had a 20 amp fuse in it but no power, key either on or off, no power. Are there other fuses in the cabin fuse panel that are not turned on and off by the start button that I can piggy back my GPS to?

The owners manual gives instructions for adjusting the vertical aim, but no mention of the horizontal aim. My right light illuminates the right shoulder leaving the center of the road darker. I'm not too much interested in seeing whats in the ditch. How can I adjust the horizontal aim?

Where is the PCV located on the 2.0L

Try this for the Sync forum. http://fordsyncforum.com/index.php??

What are the operating parameters for the shutters behind the girl?l 2.0L Titanium

THANK YOU Enigma-2. Mine is a 2017 used Edge Titanium.

One of the plate lights is not working. How do i get the cover off to replace the light?

I just bought a 2017 used Edge Titanium. It has the factory wheels with 245-55-R19 tires. The 2017 Edge SEL come with 245-60-R18. Is there an advantage with the 19" tires?

Does the 2.0L Ecoboost come with an intercooler?

Too many DIY's out there. It is intended to force you to a stealership and $$$$ out of your pocket.

I recently had the TPMS warning pop up, I reset it but the tire icon stayed on for a while then went out. This happened twice in the last 4000 miles. During this time I had a flat and the system worked fine indicating a loss of tire pressure. Went to America's Tire in Ca to get the tire fixed. They used a device to check the TPMS monitors and said they all were OK. Its been a couple weeks since we returned home and the TPMS warning has not come back. Vehicle is a 2009 Edge SEL.

Thank You Wizard!! I rewired the resistors per your wonderful instruction and low and behold it works GREAT. No more hyper blink. The series install that I had was recommended by a guy at a local auto parts store. I won't listen to them any more.

I have a 2009 Edge with 3 wire rear brake/signal/tail light sockets. I am trying to replace the factory bulbs with LED's. I am wearing out the wiring trying to installing the resistors across the proper wires. What is the right/proper way to connect the resistors? I have 50W 6RJ resistors, installed in line with the flash wire on the front and back. When I turn the key to ACC the blink is normal. The blink goes to rapid flash when the engine is running. HELP!

I have a 2009 Edge with 3 wire rear brake/signal/tail light sockets. I am trying to replace the factory bulbs with LED's. I am wearing out the wiring trying to installing the resistors across the proper wires. What is the right/proper way to connect the resistors? I have now have 50W 6RJ resistors, installed in line with the flash wire on the front and back. When I turn the key to ACC the blink is normal. The blink goes to rapid flash when the engine is running. HELP!

I just checked mine. The spoiler is Platinum White just like the rest of the car.

I put 4 Scorpion Verde All Season Plus on my 2009 in April. These replaced 4 Scorpion Verde All Season which developed a whump whump noise after 55K miles. Got a discount on new ones due to pro rated tread ware. I have 10,300 + on these now and so far they are great. Fuel economy increase is due to driving style. Got 25 MPG on one leg of a trip from Ft. Worth to Denver recently. My edge has 127,300 miles on it now.

My 2009 has been between 190 to 195 for the last 118,000 miles. I monitor it on a Scan Gage.

Are there any Edges included in the air bag issue in the news?

Is the Ford antifreeze Proplyene Glycol or Ethylene glycol?

I made a pattern of the dash back to the dash seam on the drivers side and cut a black fabric for the dash. Cut out holes for the defroster and headlight sensor from the pattern. Tuck one edge between the windshield and the dash and work the sides down between the A pillar and dash. Result = no more reflection off the dash in the windshield. Worked for me.

Check out this link from years ago on this forum. http://www.fordedgeforum.com/topic/3905-found-it/