TnMountainMan Posted January 3, 2022 Report Share Posted January 3, 2022 (edited) Help! Just bought this 2009 Edge for my wife and a few things are not working correctly. First up is both outside mirrors will only work in 2 of 4 directions. I believe it was up and right that worked only. The other two directions when pressed do nothing? Also is it alright to adjust them (for now) manually or does that screw them up? Is there some sort of method to reset them? If so please explain it to a older disabled dude. Thanks! Edited January 4, 2022 by TnMountainMan Quote Link to comment Share on other sites More sharing options...
TnMountainMan Posted January 14, 2022 Author Report Share Posted January 14, 2022 Bump... Anyone? Thanks Quote Link to comment Share on other sites More sharing options...
CARR142 Posted January 14, 2022 Report Share Posted January 14, 2022 Sounds like a bad switch, I would remove the switch and check it with a Volt/ohms/ Meter. 1 Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted January 14, 2022 Report Share Posted January 14, 2022 i dont like the feeling when i adjust them manually, there is a good amount of resistance in the system. if you can do it once and leave it there, that would be ok. if the switch is not the problem, the motor could be. do you have memory seats? Quote Link to comment Share on other sites More sharing options...
enigma-2 Posted January 24, 2022 Report Share Posted January 24, 2022 If both right and left mirrors fail to respond in up/down, its probably the switch (common link). 1 Quote Link to comment Share on other sites More sharing options...
Victor Posted February 20, 2022 Report Share Posted February 20, 2022 Try replacing the switch. Amazon has it for around $20 bucks. If they still don't work, then replacing them would be your only option. Quote Link to comment Share on other sites More sharing options...
TnMountainMan Posted February 22, 2022 Author Report Share Posted February 22, 2022 Thanks CARR142 WWWPerfA_ZN0W enigma-2 Victor I just grabbed a switch from a junked edge and will install it soon to see if that helps. If not I will buy a new switch to try and then go from there. 2 Quote Link to comment Share on other sites More sharing options...
WWWPerfA_ZN0W Posted February 24, 2022 Report Share Posted February 24, 2022 it's thursday! updates please!!! lolololol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.