Special_K

S Sure, give me part numbers!

Totally agree, 3 inch intake on the mazdaspeed platform with a tune adjusted for it adds 15 whp

Never said that, i doub it will help stock turbo folks much.... but as i said, better to get ahead of the r&d curve now.

SHO intake is 205.00 with the heat shield

Right, if you look at the my pics they are the most up to date ones

That was a requirement when i talked to him ;-)

True, however if you missed the group buy you will most likely not be able to get one.

Updated!

So i found a company willing to make an aftermarket intake for our platform. Small issue.....he's in Calorado..... so I would need one of our community members who is local to go by for a day. He said he would be more than willing to give our platform a shot. I have included a recent build fab job he just finished up for the SHO For some reference to his work, i like how his heat shield goes to the hood and uses the stock air scoop for cool air. He is located in Loveland, Colorado. Let me know what you all think! Www.j2fabrication.com

so i would like to see logs from this setup and some flow numbers

Tuning in myself, hope your experience is good and he works with you

ROFL, I'm sorry i wll remember to roll my eyes next time ;-) Hey look here mister! I'm well past puberty....i think

*kicks the floor* FINEEEEE gosh......*slams door, yells as loud as one can* you do your homework!

Idk akirby.....I'm greatly offended ..... I think you should give Snmjim a warning!!!!

Or take off the throttle body and use a bore scope ;-)

Updated with built transmission information

If nothing comes up *crosses fingers* Snmjim and i should be hitting a Test & Tune tonight! With our luck recently some random rap will come up last minute.....

I'm gonna stick with akirby with this one. it will not be plug and play. i have done seat swaps before ( from RX-8 to mazdaspeed 6) and made a custom seat bracket, and installed the seat heat by cutting the foam and had to change a few power plugs over and even then some of the features didn't work.

What exactly would you like to know? This pipe eliminates the stock pipes bottle neck where it goes from 2.5 to 1.75 back to 2.5in, this pipe is 2.5 all the way through. We have no power numbers associated with this part due to dyno failure/issues, however just basic knowledge of fluid dynamics would make this mod self explanatory. The installwill take about 3-5 hours and is mostly dependent upon how well you know the vehicle, if you are that far into the vehicle i would recommend upgrading the Intercooler also while you are there. You will need some extra tube and 2 hose clamps to attach the vacuum source hose. If you have any other questions please feel free to ask.

Thanks for look out for the community! very nice of you to share!

Topic updated with Rear Swaybar info. Please lmk if there is anything else

Especially since moog is metal and not plastic ;-)

Sure is!!!

when charge air temps are lower than intake temps....that's a good day right there

All input added all added except the wheels, idk if this is the best place for wheels. if i added wheels i would have to keep track of all the wheels&tires compatible with this vehicle.