Jump to content

Wheel locking lug nuts


davidceder

Recommended Posts

Has anyone gotten the wheel locking lug nuts (65L) on the Sport Edge with 21 inch wheels? Wondering how they look, are the chrome or dark, etc, etc. Placing the order for my Sport today and was trying to decide if I should order or maybe wait and see what i can get after market. Maybe dark ones? I imagine I can also order after the car comes in from the parts department.

 

Thanks

Link to comment
Share on other sites

you realize that locking lugs are minor deterrent/delay and NOT a prevention, correct?

 

In fact, this JUST happened to me.

 

Had to get two new tires installed due to tread ware. Fast forward 3 months and I needed to do the rear breaks. I get all my parts and tool together and son-of-bi*ch. Everyone can make mistakes. If you do, it really becomes a mistake if someone else sees or gets its benefits.

 

Seems as if the mechanic who'd replaced my tires neglected return the lug key. Now after several calls and some pushing they made it right and I drive 20 minutes to the nearest location. They hammered the "universal key" in place and removed the locks.

 

The real "good thing" of this story is that it didn't happen at 8:30pm on the highway halfway into Chicago. That would be tow charges, missed dinner date, major aggravation. Just because one person made a easy screw up and I had custom locked lugs that slowed the mechanic down ... wait it didn't slow him down at all.

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...

cab2g;

 

I have seen the locks also at zero cost but if you go to a site like NADA and build the car so you can see invoice & MSRP they are a $75.00 orderable option. I cannot imagine ford would give that for free........Do you know something else?

Yeah, I was mistaken... My dealer was too. I got them for free, but they do have a price. Go figure. They didn't order them and because of their mistake they didn't bill me for them. They told me they were free initially.

Edited by cab2g
Link to comment
Share on other sites

  • 3 months later...

Having all kinds of difficulty getting the correct wheel locks for 2016 Edge w/20" wheels. I bought on eBay part #EK4J-1A043-AA, which is an interchange part for the part GR3Z-1A043-A, which ford lists on the official parts site. These did not fit, as they stuck out like a sore thumb. I ordered on amazon McGard part 24215, anyone familiar with the McGard? Very frustrating! Thanks for the help.

Link to comment
Share on other sites

  • 1 month later...

Having all kinds of difficulty getting the correct wheel locks for 2016 Edge w/20" wheels. I bought on eBay part #EK4J-1A043-AA, which is an interchange part for the part GR3Z-1A043-A, which ford lists on the official parts site. These did not fit, as they stuck out like a sore thumb. I ordered on amazon McGard part 24215, anyone familiar with the McGard? Very frustrating! Thanks for the help.

Not familiar with McGard necessarily but I just purchased/installed the following on my '16 Edge Sport - The System from Gorilla (71643N Acorn 14mm x 1.50, 5 lug) for about $50 from Amazon. Torque to 100 ft.-lbs. and you're good to go.

 

https://www.amazon.com/Gorilla-Automotive-71643N-System-Thread/dp/B002807SF0/ref=sr_1_1?ie=UTF8&qid=1466547668&sr=8-1&keywords=gorilla+71643n

Link to comment
Share on other sites

I used a set of McGard # 24216 (M14 x 1.5) Cone Wheel Locking Nuts, in Black, to match my 20" black rims on my 2015 Edge Sport, along with a set of black lugnuts. Here is a picture; you can clearly see the locking lugnut in place. These lugnuts should also fit the 2016 models.

 

IF there is any drawback to using these, they tend to stick out a bit farther than the other standard lugnuts...

post-37844-0-72412600-1466578123_thumb.jpg

  • Like 1
Link to comment
Share on other sites

I just clicked on the link to the Gorilla System set that "Always on Edge" posted above, for the set that he said he installed on his 2016 Sport without any problems... and, ironically, their "fitment" system says that the part number he is using is somehow "not compatible" with his vehicle! LOL!

 

Like the similar fitment feature used on eBay, the one on Amazon clearly doesn't work well either... which is why I don't use that feature on either of the sites!

 

Thanks for the posting, "Always on Edge", as I am now going to ignore Amazon's useless "fitment" feature, and order the same set for my car as well!

Link to comment
Share on other sites

Actually, when I first went to his link to the Gorilla site, I'd put in my own 2015 info (since mine is a 2015), and it said the lug nuts he was using would not fit my car. Then, more out of curiousity than anything else, I tried putting in "2016" (his model year), and it said that the lug nuts he was already using would not fit his model! LOL!

  • Like 1
Link to comment
Share on other sites

Those are a great idea, and I was not familiar with the Gorillas that you used on yours. Do they also make them in black?

Yes, they come in black as well. Not sure of the part number but make sure you get a set of 20! ;)

 

I read somewhere on the internet (so it must be true) that the Edge shares the same wheel studs as the Fusion of which the M14 x 1.5 fit.

Edited by always on edge
Link to comment
Share on other sites

I was able to get a set of 20 black Gorilla locking lug nuts (Their part # 71643NBC) that fit my 2015 Sport perfectly. They are definitely M14 x 1.5.

 

IF I did have to say anything "bad" about them, it is that the black finish (what they called a "black chrome") is a lot duller than the black painted ones that they replaced. That is, since my alloy rims are black powdercoated, the new Gorilla lug nuts now look a little duller than the rims do... but I can live with that, in exchange for better anti-theft security!

Link to comment
Share on other sites

"Always on Edge", I meant to thank you for letting me know about the Gorilla multi-piece sets... I was not aware of these until you mentioned it here... and, they certainly do look a lot better on my wheels than the single McGard locking unit I originally had on there (which also stuck out about a 1/4" farther than the rest of the regular nuts on each wheel)!

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

"Always on Edge", I meant to thank you for letting me know about the Gorilla multi-piece sets... I was not aware of these until you mentioned it here... and, they certainly do look a lot better on my wheels than the single McGard locking unit I originally had on there (which also stuck out about a 1/4" farther than the rest of the regular nuts on each wheel)!

You're welcome! I recommend you purchase a second lug key (only $15) with the code that was in the box. Inevitably the dealership or tire shop will accidentally keep your lug key and/or you may misplace it yourself. I'd also recommend not keeping either one in the vehicle if you're just driving around town, you'll just be helping the wheel thieves should they break a window and rummage through your truck looking for it. :lol:

Link to comment
Share on other sites

  • 4 months later...

Seriously, its a "tool steel" deep well socket looking part with ribs on the inside surface. One or two good smacks with a BFH on any locking lug nut and an electric impact and your rims are mine.

 

The time expended to slow me down is the time it took me to reach for the "different socket" and 1-2 good hits with my BFH. 20 seconds per tire.

 

note: BFH is industry slang for BIg F'in Hammer

Link to comment
Share on other sites

  • 2 months later...

I had locking lug nuts at one point and one became stripped during torquing it down so it was on the stud at 100 and striped. All I did to get it off was take a socket that was slightly smaller that the locking Nut and I hammered on to the locking about 1/8 an inch hitting the socket with a hammer until it deformed the lug nut it is a very soft steel and sockets are heat treated. After that I placed my torque wrench into the socket I just hammered over the locking nut and backed it off the stud with ease.

Link to comment
Share on other sites

I had locking lug nuts at one point and one became stripped during torquing it down so it was on the stud at 100 and striped. All I did to get it off was take a socket that was slightly smaller that the locking Nut and I hammered on to the locking about 1/8 an inch hitting the socket with a hammer until it deformed the lug nut it is a very soft steel and sockets are heat treated. After that I placed my torque wrench into the socket I just hammered over the locking nut and backed it off the stud with ease.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...