On 5/4/2016 at 7:30 PM, wlepse said:

I haven't tried my other BT OBDII adapter but this is the one I used so I know it works: http://www.amazon.com/BAFX-Products-34t5-Bluetooth-Android/dp/B005NLQAHS/ref=lp_4920137011_1_1?srs=4920137011&ie=UTF8&qid=1462404440&sr=8-1

BAFX Products Bluetooth Diagnostic OBDII Reader/Scanner for Android Devices

That's not going to work with the Foscam full Windows version which is the only version capable of writing changes.

On 8/30/2017 at 10:04 AM, IWRBB said:

I bought this one.

 

https://www.amazon.com/gp/product/B01F0GVBWY

 

Works fine with Forscan. I reprogrammed a few things on my truck and my brothers truck.

I bought the same one on Amazon and it works with my wife's Mustang and my Edge.

16 minutes ago, roots57 said:

I bought these ones from Amazon:

https://www.amazon.com/gp/product/B01HYVT2R4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

 

They worked for about 6 months, but then the white started to flicker.  Turns out there wasn't quite enough voltage to them.  There was only about 9 volts going to them which was just under the limit to keep them operating properly.  This seems to be a common problem.  I was going to try fixing it, but decided it wasn't worth the trouble, although I really liked the look.

Thanks for the feedback, and based on that I'll not bother with switchbacks for my front turn signals.

21 hours ago, omar302 said:

The 2015-2018 Edge uses WY21W bulbs for the front signals, they are the same as 7440NA. The 2015 Mustang uses 7444NA, it seems that physically they fit, but they may or may not work. One main difference is that 7440 is a single filament bulb, park & signal are achieved by changing the light output intensity (not sure how, probably varying voltage). 7444 has dual filaments. This site claims that LED 7443 can replace 7440, if true then you can use the Mustangs LED bulb. Better check with the seller.

It looks like the 7440 switchbacks have a separate wire to power the white LED's while the turn signals are not on - I'm not too keen on that arrangement, and not sure that it will actually work on the Edge due to the low voltage/intensity when the turn signal is not on.

http://store.ijdmtoy.com/No-Hyper-Flash-7440-LED-Light-Bulbs-p/20-101.htm

http://store.ijdmtoy.com/Single-Filament-7440-LED-Switchback-Installation-a/597.htm

On 12/2/2018 at 2:54 PM, onyxbfly said:

 

I agree. Which is why I posted the question of which tuners people prefer and why. I searched and searched and.........

 

I also wanted to start a poll to see which tuner was more popular etc, there simply was not a clear cut way to do so.

12 minutes ago, akirby said:

Umm - that's the exact same one I just posted and I did find it doing a simple search for "switchback turn signal".

Yes, and now its working for me on that thread title, which was not the case previously, and not only this particular search - see the above post by @onyxbfly

11 minutes ago, akirby said:

There is no thread by that title and no similar thread started by roots57.   The only one close is this one which you already replied to:

 

 

That's the only topic and post by roots57 that I could find.   How do you "know" that topic exists?

This is the tread that I was looking for, which the search function didn't help find, ........ searching many pages of roots57 posts is how I found it.

57 minutes ago, akirby said:

 

That's not a thread, it's a photo album.

Yes, I realized that - maybe I wasn't too clear that I'm searching for the thread of that title, which does exist but the search feature is unable to find.

On 8/21/2017 at 8:01 PM, roots57 said:

Added switchback front LED turn signals to my 2016. Disabled the hyperflash with FORScan instead of adding the resistors. The switchback 7440 LEDs I got came with the 6 ohm resistors, but as soon as I felt how hot they get, I cut them off and re-programmed the BCM instead. It was actually pretty easy to do. Heres what it looks like in the daytime.

 

Where did you buy the switchback LED's ?

Damn it.

I'm trying to find a thread titled "LED DRLs and LED switchback turn signals" by @roots57

I just installed the below eBay switchbacks in my wife's 2015 Mustang, and wondering if they are the correct ones for my 2017 Sport - can anyone confirm this for me?

https://www.ebay.com/itm/7444-7443-Switchback-LED-Bulbs-WHITE-AMBER-Dual-Color-Turn-Signal-Lamp-Light/192443860151?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

All my old bookmarks for this forum no longer work, just takes you to the home page.

Search function is useless, and because of the URL changes causing the above problem, Google search results also take you to the wrong URL.

Hopefully this light bar you plan on installing is legal - there's a couple of vehicles on my morning commute that blind all oncoming drivers with their light bars.

Yes, snow and slush build-up does kick it off Cruise Control.

The Adaptive Cruise and lane guidance works in most weather condition, day or night, but not snow.

1 hour ago, bobyellow said:

Deep Impact Blue Metallic 2013 Ford Edge Sport (sold)

 

My wife's 2015 Mustang is that colour - one of my favourites "blues".

That doesn't sound like a noisy lifter - I'd get it to the dealership service center ASAP and have it addressed under warranty.

I have the same model, it it does not make any noise - you could add your model/engine to your profile.

55 minutes ago, Rowdyone99 said:

I put it on YouTube this forum won’t let me post it because it’s to many mb. It’s a loud ticking sound coming from the front passenger side after cold start. It’s under Jeremy Piper

No such video comes up in a search - what's the title?

Any chance of responding to the questions previously posted?

53 minutes ago, Rowdyone99 said:

Issue is during start up there’s a loud ticking sound that comes from the front passenger side. Is it normal? 

Unlikely that its normal.

What engine?

What's the mileage?

What's the service history, when last was the oil and oil filter changed?

What oil and oil filter have you been using?

If not OEM oil filter it might not have an anti-runback valve.

Any sign of sludge when viewing into the oil fill cap?

It could be an oil pressure problem causing the valve lifters to make a noise.

2 hours ago, Craigtaz said:

Thanks. I'm embarrassed to ask, but what is the component in the photo, and where is it located?

BTW, according to the paperwork from Ford, the fault code for my issue is P188B.

I'm not sure which item/component you're referring to.

Bear in mind that I didn't check for error codes seeing as I knew exactly what the cause was - check @WWWPerfA_ZN0W for the likely cause of your error code.

The brass device is the temp sensor.

Here's a photo - I'll try find a better one.

It gets in the way of the fill plug, so I unplug it when filling.

The brass device is the temp sensor.

When I turned on the ignition after I did a lube service, which included the PTU, I got this warning light, .......... because I forgot to connect the PTU temperature sensor.

Just got a call from my dealership that the replacement has been approved, its ordered, and once it arrives we'll schedule a time and date for the +- 1.5 hour install while I wait.

Had mine at the dealerships collision centre, same place that installed the new one on the passenger side early last year - he took photos and will get back to me when he hears back from Ford Corp.

1 hour ago, 2FAST4U said:

Sorry but I'm looking at the picture but I don't see any water… 

Claude. 

Not easy to capture with a cell phone.

Trying to see if this is a common issue or not.

Concern is that the electrics/electronics would be corroded.

Do you have water trapped in front signature lights?

Last year my passenger side signature light was replaced under warranty because it had water trapped in the lens, now my drivers side has the same issue.

The passenger side is still good.

I'm at 33K miles and 21 months, so intend get it to my dealership to start the process of replacement, but just wondered if others are experiencing this.