vmaxbaby Report post Posted April 9, 2019 I call all the exhaust companies every 2 weeks to find out what the status is and the guy said they finally got one. Before you click on the link be sitting down for the price...hopefully someone will sell them a little cheaper. https://www.borla.com/products/edge_st_catback_exhaust_stype_part__140766.html Share this post Link to post Share on other sites
Perblue Report post Posted April 9, 2019 Yep. Eddie already ordered one for less Share this post Link to post Share on other sites
Gregertech Report post Posted April 13, 2019 Anybody else getting one? I would love to hear a sound clip. Hopefully there's no drone at cruising speeds. Share this post Link to post Share on other sites
vmaxbaby Report post Posted April 14, 2019 I called Borla and ask for a sound clip since they put this on an Edge ST already and the guy on the phone said they didn't record it ??? that makes no sense why they won't make a quick video of it but I guess we will have to wait for someone that buys it to post up on youtube. Share this post Link to post Share on other sites
Fingernip Report post Posted April 15, 2019 4 hours ago, vmaxbaby said: I called Borla and ask for a sound clip since they put this on an Edge ST already and the guy on the phone said they didn't record it ??? that makes no sense why they won't make a quick video of it but I guess we will have to wait for someone that buys it to post up on youtube. It is odd. They have power increase claims and no sound bites. Someone forgot to hit record I guess. Share this post Link to post Share on other sites
Perblue Report post Posted April 15, 2019 22 minutes ago, Fingernip said: It is odd. They have power increase claims and no sound bites. Someone forgot to hit record I guess. I must be blind I don't see the power claims. Share this post Link to post Share on other sites
Fingernip Report post Posted April 15, 2019 23 minutes ago, Perblue said: I must be blind I don't see the power claims. I contacted them also. ”You should see 6-10 additional rear wheel hp over factory. We do not have and sound or video samples. My apologies.” Share this post Link to post Share on other sites
eddie368 Report post Posted April 15, 2019 21 hours ago, vmaxbaby said: I called Borla and ask for a sound clip since they put this on an Edge ST already and the guy on the phone said they didn't record it ??? that makes no sense why they won't make a quick video of it but I guess we will have to wait for someone that buys it to post up on youtube. I have one ordered but borla said it would not be shipped until May 3rd.. I'll make a sound clip of it if someone doesn't get one before me. 1 Share this post Link to post Share on other sites
fieldzz Report post Posted April 16, 2019 Summit racing now has it on there site for $1384.99 w/ free shipping.. https://www.summitracing.com/parts/bor-140766 1 Share this post Link to post Share on other sites
SmittyST Report post Posted May 1, 2019 Does anyone have one of these installed yet? Share this post Link to post Share on other sites
vmaxbaby Report post Posted May 2, 2019 Looking forward to hearing what it sounds like for sure. Borla on the Explorer sounds good so hopefully this engine does as well. Share this post Link to post Share on other sites
eddie368 Report post Posted May 2, 2019 I just talked to borla in Calif. and was told they have them scheduled for shipment on may 15th. Share this post Link to post Share on other sites
SmittyST Report post Posted May 18, 2019 On 5/2/2019 at 6:10 PM, eddie368 said: I just talked to borla in Calif. and was told they have them scheduled for shipment on may 15th. Any word yet? Share this post Link to post Share on other sites
eddie368 Report post Posted May 18, 2019 2 hours ago, SmittyST said: Any word yet? Smitty I spoke to borla in Calif.yesterday and they are now saying shipment will start on Friday may 24th. but this is the 4th time they have set it back...........Ed Share this post Link to post Share on other sites
vmaxbaby Report post Posted June 3, 2019 Any update on the borla exhaust Share this post Link to post Share on other sites
TonyYovan Report post Posted June 4, 2019 I installed mine this weekend. From outside it sounds great. Nice deep rumble on startup and idle. Doesn't sound like a coffee can when driving. Inside the car is a different story. The pipes end where the stock ones did ie inside the bumper. A good 4 to 5 inches from flush with the outlet. Sounds terrible when driving unless you roll all the windows down. I may be able to adjust it a little, but I'm thinking just get some exhaust tips to bring that out flush or just past the outlet. Share this post Link to post Share on other sites
fieldzz Report post Posted June 4, 2019 10 hours ago, TonyYovan said: I installed mine this weekend. From outside it sounds great. Nice deep rumble on startup and idle. Doesn't sound like a coffee can when driving. Inside the car is a different story. The pipes end where the stock ones did ie inside the bumper. A good 4 to 5 inches from flush with the outlet. Sounds terrible when driving unless you roll all the windows down. I may be able to adjust it a little, but I'm thinking just get some exhaust tips to bring that out flush or just past the outlet. We need sound clips! Lots of drone?? Share this post Link to post Share on other sites
TonyYovan Report post Posted June 4, 2019 (edited) Yea it's pretty bad. Like I said I might be able to adjust the where they exit but I think adding tips would make it look and sound better anyway. Unfortunately my ST is at the dealer getting the brakes fixed (AGAIN). I'll see if I can get a sound clip up tomorrow after I pick it up. Borla does have a 2.7L F-150 on YouTube. In the video they show stock, Touring, S-Type (the one they make for the Edge), and ATAK. Same engine so I figured sound would be similar. Edited June 4, 2019 by TonyYovan Share this post Link to post Share on other sites
vmaxbaby Report post Posted June 4, 2019 Sorry to hear this...on there website they have no drone listed for the S-Type...now thinking this is why they don't have an exhaust sound clip inside the car because it has drone Granted I only have 72 miles on my edge but already I can't stand how quite it is and I held back 1K dollars from putting down on the car so I could put toward a cat back. Share this post Link to post Share on other sites
Rimcrim Report post Posted June 4, 2019 I think the MRT also ends at the stock location and doesn't stick out, but theirs doesn't seem to drone too bad from the interior video that they posted. If/When I replace my exhaust I will definitely get tips to extend it outside - not really a huge fan of the stock exhaust housing. Share this post Link to post Share on other sites
Special_K Report post Posted June 5, 2019 On 4/9/2019 at 7:15 PM, vmaxbaby said: I call all the exhaust companies every 2 weeks to find out what the status is and the guy said they finally got one. Before you click on the link be sitting down for the price...hopefully someone will sell them a little cheaper. https://www.borla.com/products/edge_st_catback_exhaust_stype_part__140766.html Got a better recommendation for you...just delete the center resonator. No drone, a little extra bite, no CEL, and about 150 bucks at any exhaust shop Share this post Link to post Share on other sites
Sage Report post Posted June 5, 2019 ^^^^ I put in an “X” pipe in place of the resonator, I like the results. I than put in two muffler bypass valves that kick in about 7 lbs of boost, like that as well. Share this post Link to post Share on other sites
Special_K Report post Posted June 5, 2019 1 hour ago, Sage said: ^^^^ I put in an “X” pipe in place of the resonator, I like the results. I than put in two muffler bypass valves that kick in about 7 lbs of boost, like that as well. Are you claiming you picked up 7psi of boost from a muffler bypass? What is your boost peaking at? Share this post Link to post Share on other sites
Fingernip Report post Posted June 5, 2019 46 minutes ago, Special_K said: Are you claiming you picked up 7psi of boost from a muffler bypass? What is your boost peaking at? I think hes saying the bypass opens at 7psi. He must have a boost gage with a trigger set to open the bypass. Share this post Link to post Share on other sites
Sage Report post Posted June 5, 2019 (edited) The valves came from the manufacture set to fully open at 7 psi boost. You can hear them starting to open around 5-6 psi boost and fully open at 7. I had the bypass valves put in behind the rear axle and the piping routed from the valves around the muffler and spliced back into the exhaust pipes. Edited June 5, 2019 by Sage Share this post Link to post Share on other sites